philips HID-PV C 150 _S CDM 220-240V 50_60Hz philips electronic ballast

HID-PV C 35 _C CDM 220-240V 50_60Hz

HID-PV C 70 _S CDM 220-240V 50_60Hz

HID-PV C 150 _S CDM 220-240V 50_60Hz

HID-PV E 70 _S CDM 220-240V 50_60Hz

PrimaVision Power gear is designed for optimal performance of 100 and 150 W CDM

lamps – ideal where high-intensity light is key.

Product data

General Information

Lamp type CDM

Number of lamps 1 piece/unit

Suitable for outdoor use No

Number of products on MCB (16 A type B) (nom.) 6

Automatic restart Yes

Operating and Electrical

Input voltage 220 to 240 V

Input frequency 50-60 Hz

Operating frequency (nom.) 0.14 kHz

Power factor 100% load (nom.) 0.95

Ignition voltage (max.) 5.0 kV

Ignition switch-off time (nom.) 20 min

Mains voltage performance (AC) -10%-+6%

Mains voltage safety (AC) -18%-+10%

Earth leakage current (max.) 0.35 mA

Inrush current width .50 ms

Constant wattage deviation -3%/+3%

Power losses (nom.) 10 W

Inrush current peak (max.) 50 A

Wiring

Cable capacity output wires mutual (nom.) 200 pF

Cable length from device to lamp 2.0 m

Wire strip length 10.0-11.0 mm

Ballast contact wire cross section 0.50-2.50 mm²

Connector type Insert

System characteristics

Rated ballast-lamp power 150 W

Temperature

T ambient (max.) 60 °C

T ambient (min.) -20 °C

T storage (max.) 85 °C

T storage (min.) -25 °C

T case lifetime (nom.) 75 °C

T-Case maximum (max.) 85 °C

DatasheetIf you have any question or more requirement,feel free to contact me, I will reply you ASAP 

CTN:Harry Hu