Multiparameter portable pH/Conductivity meter contains 6 measurement modes, the meter is suitable for measuring the pH, ORP, conductivity, TDS, salinity and resistivity.
pH Mode:
• Multiparameter portable pH/conductivity meter is equipped with a backlit LCD display.
• 1 to 5 points push-button calibration with auto-buffer recognition.
• Selectable pH buffer group (USA/NIST/DIN) or using the custom calibration solutions.
• Automatic electrode diagnosis with pH slope and offset display.
ORP Mode:
• 1 point offset calibration allows adjusting the displayed value to a known standard.
• Relative and absolute millivolt modes provide the reliable ORP measurements.
• 1 to 5 points calibration, automatically recognizes the conductivity standard solutions.
• Selectable cell constant (K=0.1/1/10), reference temperature (20/25°C), TDS factor, linear/
pure water compensations, seawater and practical salinity measurement modes.
Other Features:
• Automatic Temperature Compensation ensures accurate readings over the entire range.
• Calibration Due Alarm prompts user to calibrate the meter regularly.
• Stability indicator shows when a measurement is recognized as stable.
• Auto-Read feature senses and locks the measurement endpoint.
• Battery indicator shows the remaining battery capacity.
• Auto-Power Off effectively conserves battery life.
• Calibration report provides the details for checking the electrode performance.
• Setup menu allows setting the 12 parameters, including the number of calibration points,
stability criteria, temperature unit, date and time, etc.
• Reset feature automatically resumes all settings back to factory default options.
• Expanded memory stores and recalls up to 500 data sets.
• Stored readings can be transferred into the computer by USB communication interface.
• Multi-mode power scheme (batteries, power adapter and USB port) ensures that use the
meter smoothly.
Model 902P
pH Range -2.000~20.000pH
Accuracy ±0.002pH
Resolution 0.1, 0.01, 0.001pH, selectable
Calibration Points 1 to 5 points
pH Buffer Options USA, NIST, DIN or Custom
mV Range ±1999.9mV
Accuracy ±0.2mV
Resolution 0.1, 1mV, selectable
Calibration Points 1 point
Measurement Modes Relative or Absolute mV
Conductivity
Range 0.01~20.00, 200.0, 2000µS/cm, 20.00, 200.0mS/cm
Accuracy ±0.5% F.S
Resolution 0.001, 0.01, 0.1, 1
Calibration Points 1 to 5 points
Calibration Solutions 10µS/cm, 84µS/cm,1413µS/cm,12.88mS/cm,111.8mS/cm
Temperature Coefficient 0.0~10.0%/°C
Compensation Modes Linear or Pure water
Cell Constant K=0.1, 1, 10 or Custom
Reference Temperature 20°C or 25°C
TDS Range 0~10.00, 100.0, 1000ppm, 10.00, 100.0ppt (Max. 200ppt)
Accuracy ±1% F.S
Resolution 0.01, 0.1, 1
TDS Factor 0.1~1.0 (Default 0.5)
Salinity
Range 0.00~80.00ppt, 0.00~42.00psu
Accuracy ±1% F.S
Resolution 0.01
Measurement Modes Practical salinity (psu) or Natural seawater (ppt)
Resistivity Range 0.00~20.00MΩ
Accuracy ±1% F.S
Resolution 0.01, 0.1, 1
Temperature Range 0~105°C, 32~221°F
Accuracy ±0.5°C
Resolution 0.1°C, 0.1°F
Calibration Points 1 point
Calibration Range Measured value ±10°C
General Temperature Compensation 0~100°C, 32~212°F, Manual or Automatic
Data Hold Manual or Auto-Endpoint
Stability Criteria Low or High
Calibration Due Alarm 1 to 31 days or Off
Power Off Manual or Automatic (10, 20, 30 minutes)
Reset Function Yes
Memory Stores up to 500 data sets
Output USB communication interface
Connector BNC, 6-pin mini plug
Display LCD
Power 3×1.5V AA batteries or DC5V power adapter
Battery Life Approximately 150 hours (Turn off the backlit)
Dimensions 170(L)×85(W)×30(H)mm
Weight 300g