p16 outdoor traffic variable message sign on highway gantry
p16 outdoor traffic variable message sign on highway gantry
PRODUCT FEATURE
1.display module having the versatility and interchangeability can be composed of different display colors and different sizes according to needs.
2.double-box structure, the formation of internal natural convection mode, so cabinets space temperature reaches equilibrium.
3. pixel module junction box and use the "O" ring, with good moisture anti-leakage performance.
4. module package uses advanced soft silicone, the elastic, strong anti-aging ability.
5.power supply, it is important IC device through the heat sink cooling, not only solve the heat, but also to ensure the performance is unstable due to mechanical failure when the cooling fan caused.
6. use special wide temperature range of the device, ensure the normal operation of the display at high or low temperatures.
7.The control system only with the IPC, and higher reliability.
8. use of sophisticated large-scale integrated chip high-speed serial transmission network alternative to discrete parallel transmission chip, reducing the complexity of the transmission display, reducing the complexity of the control system to improve the stability of the product.
9. using the network cable to transmit data to reduce the screen body inside the transmission cable, greatly improve the stability of the display.
10. using a common network data transmission technology, improve gradation display variable message signs, information boards enable a better display.
11. using a common network data transmission technology, in favor of compatibility and product upgrading. Help to improve the response speed of the system variable message signs.
Shenzhen Manufacturer Traffic road waterproof outdoor led display board
Generally speaking, variable message sign is used to communicate in realtime with motorists. variable message sign must address current conditions on the roadway by being dynamic,
accurate, timely and understandable. When there are multiple requests to post VMS messages simultaneously, messages will be prioritized in the following order .glare-LEDs' traffic variable message led display is widely used in highway, city road, highway tunnel road, displaying the road situations info, Traffic command department dispatches information, weather information and so on.
of importance:
1. Incident Management/Public Safety.
2. Congestion Management/Motorist Guidance.
3. Construction/Maintenance Activity.
4. Special Events.
5. Environmental.
6. Law Enforcement Message.
7. Public Service Campaign.
p16 portable outdoor traffic led display on highway gantry
Shenzhen factory road safety Traffic display sign
Features of Variable message signs:
Light source : High Power LEDs.
Housing: Aluminium profile, modular design principle in seawater-proof aluminium AlMg3 or stainless steel (V4A, 1.4571)
Protection class :P1, P2, P3, drainage and ventilation holes IP54
Temperature classes: T1 (-15 - +60°C) / T2 (-25 - +55°C) / T3 (-40 - +40°C)
Humidity range: 20 – 95% rel. humidity
Controller•Embedded controller designed for industrial temperature range : -40 to +85 °C •
Integrated fast access solid state data memory •
High speed picture interface using latest type of Dual port RAM and FPGA technology •
Number of colours : mono, bicoloured, 3, 5, 256 colours •Max. picture rate 20 frames/second
Interfaces •RS485/RS422 interfaces, interface for Profibus©, Profinet, Canbus, Ethernet IP, WLAN and future interfaces •
TCP/IP connection via RJ45 •digital inputs •digital and analogue sensors
Mounting options C-rails Pipe clamps Other constructions on request
Protocols FUTURITCOM 2 FUTURITCOM 2 via Profibus TLS 2002 / 2009 XDR/DAP NTCIP others on request
Optics The optical equipment fits tightly into the matrix. Contrast ratio up to 25, even at low sun position
Pixel pitch : (freely programmable Variable message signs) 16 / 20 / 25 / 31.25/33.33 mm
p16 outdoor traffic variable message sign on highway gantry parameter:
| Lamp beads | specific traffic LEDs |
| Pixel pitch | P16 |
| Display dimension | customize |
| Cabinet material | aluminum or cold rolled iron |
| Chip color | full color |
| Brightness | >12000cd/m2 |
| Brightness adjust | manual or auto adjust |
| Viewing distance | 16-300m |
| Control mode | asynchronous control |
| Communication port | RS232/RS485/RJ45/GPRS/3G etc |
| Refresh rate | >120hz |
| Certificate | CE/FCC/ROHS etc |
| Life span | 100,000 hours |
| Rate of dot out of control | <1/10000 |
| Insulation resistance | >100MΩ |
| High voltage resistance test | withstand 1500V / 50Hz AC voltage for 1 minute without breakdown |
| Impact resistance test | pass |
| Vibration resistance test | pass |
| Contact resistance | <0.1Ω |
| Protection class | IP65~68 |
| Operating Humidity | 5%-95% |
| Operating temperature | -40℃~+75℃ |
| Power supply | AC220V±18% / 50Hz±10% |
| AC380V±18% / 50Hz±10% |
| Name | Specification | Function |
| control system | main control system | communicate with the centerof the screen |
| drive traffic monitoring | ||
| Brightness adjust system | Brightness adjustment based on ambient | |
| light traffic control system screen brightness | ||
| power system | power distributor | Centralized power system distribution box |
| power lightning protection devices | imported professional ightning protection | |
| signal lightning protection devices | devices | |
| Remote Switch electrical system | Remote Switch electrical system with remote | |
| step-switch function | ||
| Communication module | RS-485 communication module | Industrial communication module |
| industrial grade communication module | ||
| RS-232 communication module | ||
| Ethernet communication module | ||
| LED variable message signs screen perform the following national standards | ||
LED variable message screen | GB/T 23828-2009 | fully in accordance with international design, |
| production and testing | ||
| Traffic sign display | GB 5768.2 | traffic sign text, graphics meet the standards |
| Chinese character display | GB 2312 | digital display standard Chinese characters |
| Shell protection grade | GB 7000.1 | IP65 protection rating |
Communication interfaces and protocols | JT/T606.1 and JT/T606.3 | standard asynchronous |
Variable message signs Cabinets Parameters
Variable message signs LED Displays Aging Test
Variable message signs LED Display Manufacturing Proces
Variable message signs Project cases on High way
Variable message signs Project case in Metro Station
Variable message signs Project cases in Toll Station
EN12966, CE, RoHS, FCC etc
Q: What's the warranty of Variable message signs ?
A:We provide 1 year free warranty for any queality issue.
Q:What's the payment terms?
A:T/T or Western Union is OK. 30% as deposit,the balance 70% you can pay us before shipping.
Q:What place and filed of this variable message sign is used widely?
A: Variable message signs is widely used in high way, tunnel,city street way,street,airport,ferry,metro station.
If you are interested in our products,please don't hesitate to contact us.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier