overrunning freewheel one way clutch bearing NFS15 ASNU15 15mmX42mmX18mm

PRODUCTS DESCRIPTIONS- NFS15 overrunning freewheel one way clutch bearing ASNU15 15mmX42mmX18mm

ASNU(NFS) Series

Type ASNU(NFS) is a roller type freewheel non-bearing supported­. Bearings are required to

support axialand radial loads. Lubrication and sealing must also be provided by the

installation. Nominal outerdiameter is the same as a series 63.. ball bearing

A typical arrangement is to install this type alongside a bearing within the same location

tolerances, as shown on the following page. The inner race is keyed to the shaft. The outer race has positive n6  tolerance, to give a press fit in a H7 housing. Additional side notches in the outer race provide for positive torque transmission.

If the housing is to K6 tolerance, use of the notches is not necessary, but the housing must

be strong enough to not expand after assembly. This design can accept an axial misalignment of inner  and outer race of ± S/2.

CATALOG & PICTURES

APPLICATIONS

COMPANY INTRODUCTION

Motion (Shanghai) Industrial Development Co;Ltd (registered trademark “MOTN”) focuses on bearings and transmission products. We are dedicated to the production and selling of our industrial parts mainly including one way clutch bearings (freewheel clutch bearing & one way clutch needle roller bearing); track roller bearing; wire straightening roller bearing; needle roller bearings; stainless steel bearings and plastic & ceramic ball bearing ect, 

The one way clutch bearings and freewheel clutches are mainly for use in numerous Industrial Power Transmission applications including Conveyor & Conveying Equipment, Food Processing Machinery, Gear Reducers, Hoists & Cranes, Mining Machinery, Machine Tools, Paper Converting Machinery, Packaging Machinery, Pumping Equipment, and many other types of Specialty Machinery.

Our factories are all ISO certificated and have strict quality control management to make sure our clients could receive the good quality goods from us

Now we have our products sold to more than 30 countries and 80% of them to the European market; Thanks to the efforts of our professional staffs and the big support of our foreign clients, we can get we are today. 

Welcome more clients to join us !

WORKSHOPS & INSPECTION EQUIPMENTS

PACKING & SHIPMENTS