outstanding strength Carburetor for Honda ATV ATC110 ATC125 TRX90 FOURTRAX XL125 PZ22 CT90 CT110 22mm pull wire damper

A carburetor relies on the vacuum created by the engine to draw air and fuel into the cylinders. This system was used for so long because of the simplicity behind it. The throttle can open and close, allowing either more or less air to enter the engine. This air moves through a narrow opening called a venturi. The vacuum is a result of the airflow required to keep the engine running. To get an idea of how a venturi works, picture a river flowing normally. This river is moving at a steady pace and the depth is very consistent for the entire length. If there is a narrow section in this river, the water will have to speed up for the same volume to get through at the same depth. Once the river returns to the original width after the bottleneck, the water will still try to retain that same velocity. This makes the higher-velocity water on the far side of the bottleneck pull on the water approaching the bottleneck, creating a vacuum. Thanks to the venturi, there is enough of a vacuum inside of a carburetor for the air passing through it to steadily draw gas from the jet. Found inside of the venturi, the jet is an opening where fuel from the float chamber can mix with air before entering the cylinders. The float chamber holds a small amount of fuel, like a reservoir, and allows fuel to easily flow to the jet as it is needed. As the throttle opens, more air is drawn into the engine, bringing with it more fuel, which makes the engine create more power. The main issue with this design is the fact that the throttle has to be open for the engine to get fuel. The throttle is closed at idle, so an idle jet allows a small amount of fuel to enter the cylinders to keep the engine from stalling. Other small issues include excess fuel vapor escaping the float chamber(s).

TAIZHOU XINYI TECH CO.,LTD. was founded in 2015. We located in Binhai Industrial Area,Taizhou, Zhejiang Province. We have professional engineers and management team in the producing of the Go kart parts,Motorcycle parts,ATV/UTV parts,Minibike parts and more for U.S.A, Russian, Europe, Brazil, and other countries. We have enough ability to satisfy different requirements from yours in this field.Who could bring a lot of international experience and professional and an unparalleled level of service for you.

Q1. How to pay?
A: TT, PAYPAL, WEST UNION, DP, DA, Credit card up to you.

Q2. What is your term of delivery?
A: EXW, FOB, CFR, CIF, DDU.

Q3. How about your delivery time?
A: Generally, it will take 24-48 hours after receiving your advance payment. Some is one week. The specific delivery time depends on the items and the quantity of your order.

Q4. How to produce customized products?
A: Yes, We can produce by your samples or technical drawings. We can build the molds and fixtures.

Q5. How to get a sample?
A: We can supply the sample if we have ready parts in stock.

Q6. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q7: How do you make our business long-term and good relationship?
A: 1. We keep good quality and competitive price to ensure our customers benefit ;
     2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter          where they come from.