Light Sources | 18x40w RGBW 4 in 1 LED |
Beam Angle | 3.2°-50° |
Power Consumption | 720 w |
DMX Channel | 19/25/61 Channel |
Control Modes | DMX512/Auto-Run/Master-Slaver/Sound/RDM |
Display | 4 touch buttons,Color led screen with 180 degree rotation |
Protection Rating | IP65 |
Warranty | 2 years |
Tilt | 270° |
Dimension | 50.8X20.8X35.1cm |
NW | 16 kgs |
There are 5 normal steps for QC control process: | ||||||||
Step 1: all materials passed 100% IQC inspect | ||||||||
Before send materials to workshop and start to produce, our IQC technicians will inspect them. And only the materials are approved to send to workshop if they are qualified. | ||||||||
Step 2: at least 48 hours aging test before packing | ||||||||
All unit lights will be 100% QC inspect and takes around 48- 72 hours aging test | ||||||||
Step 3: hang testing | ||||||||
Each batch production we will select certain percent to do hang or rotating test. | ||||||||
Step 4 : Environment high temperature testing | ||||||||
we did two parts test for high temperature testing : | ||||||||
A: testing during the product still in R & D | ||||||||
B: testing for each batch production | ||||||||
Usually we test the temperature reach to around 45℃. | ||||||||
Step 5 : vibration test--simulating transit environment | ||||||||
each batch production we will select certain percent to test to make sure the goods is safe in transport. |