FETURES :
1. The dripper has self filtering windows, good anti-clogging performance
2. Turbulent flow design , flow is turbulent
3. Large section of the outlet chamber , improves the anti-clogging capabilities
4. Emitter spacing can be customized with wide range .
5. The emitter is installed in the factory , reducing installation and investment cost
6. paving length is long .
WE CAN DO OEM.
PUT THE CUSTOMER'S COMPANY NAME .
TAPE SIZE ...
ON THE SURFACE OF THE TAPE
WE CAN MAKE TWO MARKING LINE WITH CUSTOMER REQUIRED COLOR
During production, for each roll of drip irrigation tape, reserve 5 meters as sample to inspect the quality. The inspection should include:
1, The appearance, whether there is big spot, pit, vertical strip, horizontal stripe, scratch;
2, The dripper side, whether it is stick on tape properly. If the dripper is stick too hard, the thickness of the tape will be smaller; if the dripper is not stick firmly, after open the tape, the dripper can be taken off easily;
3, The inside of the tape, whether there is any scratch;
4, The diameter , the dripper space, and the thickness of the tape;
5, The hole of the dripper, whether the scrap is absorbed and the depth of the hole
6, The weight of each roll;
7, The water flow rate under the working pressure 0.1Mpa , we have provided the device for testing the flow status;
8, The bursting pressure of the tape
PACKAGE MATERIAL :
CARTON BOX AND PLATIC FILM OUTSIDE
WITH PRODUCT INFORMATION MARKS .
2000METER PER ROLL IS STARDARD LENGTH .
WE CAN ALSO MAKE EACH ROLL LENGTH ACCORDING TO CUSTOMER'S DEMANDS.
SUCH AS 1000METERS /ROLL.
STANDARD PACKAGE
STANDARD PACKAGE
OEM PACKAGE
This machine is used to produce inner drip irrigation tape
