Micro powder grinding mill is designed by our R&D department on the basis of multiple innovation and testing, It has been proved by thousands of customers that our machine has outstanding features, stable quality,easy operation and maintenance.It is the ideal equipment for fine powder milling.
1.Grinding machine for mining, ore, chemical and construction, etc.
2.High fineness.Ultrafine grinding 325-2500mesh(47-5um) adjusted.
3.High capacity.0.5-25 t/h.High efficiency.
4.Long lifecycle of spare parts.The ring and roller are forged by special material with high utilization.
5.High safety and reliability.As no rolling bearings or screws in grinding cavity, there are no problem caused by bolts shedding or rapid wear of bearings and seal components.
6.Environment-friendly.Application of pulse bag filter & muffler greatly alleviates dust pollution and noise.
7.Advanced intelligent speed control device.Convenient adjusting, uniform particle size.
HGM series Micro Powder Grinding Mill is the equipment specializing in producing fine and superfine powder of non -inflammable,non-explosive and brittle materials with Mon's hardness
under six ,such as calcite ,chalk,limestone,dolomite,kaolin,bentonite,talc,mica,magnesite ,illite
pyrophyllite and vermiculite,sepiolite,diatomite,barite,gypsum,alunite,graphite,fluorite,rockphosphate,Kalium ore,pumice, fly ash,etc,totally more than 100 kinds of materials.
Parameter 1
Model | HGM80 | HGM90 | HGM100 | HGM125 | HGM168L |
Ring Diameter (mm) |
800 | 900 | 1000 | 1250 | 1680 |
Ring Number (PCS) |
3 | 3-4 | 4 | 4 | 4 |
Roller Number (PCS) |
18-21 | 24-29 | 28-36 | 30-44 | 30-40 |
Main Shaft Speed (r. p. min) |
230-240 | 200-220 | 180-200 | 135-155 | 120-130 |
Input Size (mm) |
≤10 | ≤10 | ≤15 | ≤15 | ≤20 |
Finished Size (um/mesh) |
74-5 (200-2500) |
74-5 (200-2500) |
74-5 (200-2500) |
100-6 (150-2000) |
100-9 (150-1500) |
Capacity (t/h) |
0.4-4.5 | 0.6-6.5 | 1-9 | 2-16 | 3.8-30 |
Outlet Size L*W*H (m) |
13.9*4*6.2 | 14.7*4.8*7.2 | 18*4.6*8.6 | 14*9*10.25 | 26.3*7.5*11.9 |
Parameter 2
Unit KW |
HGM80 | HGM90 | HGM100 | HGM125 | HGM168L |
Main Unit |
55-75 | 2*45 | 132 | 185-200 | 315 |
Classifier |
18.5 | 18.5 | 30 | 37-4*15 | 5*18.5 |
Blower |
45 | 55 | 75 | 2*45-2*55 | 2*75-2*90 |
Crusher |
18.5 | 18.5 | 18.5 | 45 | 75 |
Bucket Elevator |
3 | 3 | 4 | 4 | 7.5 |
BeltConveyor Feeder |
2.2 | 2.2 | 2.2 | 3 | 3 |
Spiral Conveyor |
3 | 3 | 3-4 | 2*3 | 2*5.5 |
Discharging Valve |
2*0.75 | 1*0.75 1*1.1 | 2*1.1 | 2*1.1 | 2*0.75-2*1.5 |
Air compressor |
11 | 15 | 22 | 2*15-37 |
55 |
Coating Machine | Ultrafine Vertical Roller Mill | Raymond Mill |
Used to stone powder modifaction machine |
Finished Size: 600-4500(mesh)
Capacity: 3-20(t/h)
Pass rate: D50 2 micron |
Finished Size: 50-450(mesh)
Capacity: 1-28(t/h)
Pass rate: D90 30 micron |
Crusher | ||
Feeder size:150-130(mm)
Input Size:125-850(mm)
Capacity:1-500(t/h) |
Input size:≤25(mm)
Discharge size:0.074-0.89(mm)
Capacity:0.8-260(t/h) |
Feeder Size: 200-400(mesh) Capacity: 0.6-5(t/h) Pass rate: D90 2 micron |
Because there 5 different kinds of ultrafine grinding mills, so our HGM series grinding mill unit has different prices, I need to ask you some details for sending you the more suitable quotation:
1.Which kind of material you are going to grinding?
(Dolomite; Calcite; Quartz; Basalt; Barite; Feldspar ; Gravel; Bentonite; Gypsum; Granite; Coal; Slag; Pebble; Others )
2. What's the production capacity you want? How many tons or cubic meters per hour?
( > 100 TPH > 50 TPH > 30 TPH > 10 TPH > 1 TPH < 1 TPH)
3.What's the granularity of the final products you need?
(in milimeter, micron or mesh)
4. What's the max input size of the material?
(In inch,centimeter or milimeter)
* If you would like more details, please contact our customer service.