orbita hotel power saver automatic electric power saver China supply

2. Detailed Photos  

• For MF card type: ESS-40
• For Temic RF card type: ESS-30
• For IC card type: ESS-10
• For Magnetic card type: ESS-11
• For General use: ESS-00  
• For Room only type: ESS-20
• For 3 phase type: ESS-70

3. How Orbita energy saving swtich software works?  

4. How to use the energy saving switch?

• Before entering the rooms, guest must insert the room card into the Energy Saving Switch to turn on the illumination system. While leaving the room, the guest draw the room card, the power supply will be shut off by the Energy Saving Switch about 15 seconds later.

• The delay function is essential in the Energy Saving Switch, without it, the guests have to leave the room in the dark.  

• Generally, the consumption of the illumination system in each room in the hotel is about 2000 watt. If the guest forget to turn off all the electric appliances before leaving, it would cause great energy waste. To cope with this risk, we developed this Energy Saving Switch for hotels, cebus, condos to save energy, keep facilities in good conditions.

5. Energy saving switch is used for following 6 types

• Ordinary energy saving switch( Can accept any card to gain the power.)
• IC chip card energy saving switch( Only accept IC chip outside card to gain the power.)
• 125KHZ card (Such as Temic or EM card) energy saving switch( Only accept 125KHZ card to gain the power.)
• 125KHZ card (Temic card) energy saving switch( only accept programed Temic cards with room number to gain the power)
• 13.56MHZ card (such as MF 1K card) energy saving switch( Only accept 13.56MHZ card to gain the power.)
• 13.56MHZ card ( MF 1K card) energy saving switch( only accept programed MF 1K cards with room number to gain the power)

6. How to install energy saving switch with diagram?

7. Oribtia energy saving switch feature

• Hotel card key switch turns electrical circuits on or off when a key card is inserted or removed from its slot. Energy-efficient hotel card key switch, helping the hospitality industry reduce energy consumption in empty hotel rooms.
• This assures that when guests are not in their room, energy will not be wasted on lights or appliances left on. When a guest enters a room, guests key card is inserted into a docking station. After the key card is inserted, infrared signal is obstructed or RF contactor/non-contactor is activated subsequently "energizes" the hotel guest room. When the key card is removed from its dock, the controlled circuits will have power for another 15 seconds to allow safe exit from the room before power is turned off. To restore power to the rooms controlled circuits; reinsert the hotel key card into the card key switch.  
• By reducing the amount of energy exhausted on lighting, heating and cooling unoccupied rooms, with hotel card key switch, hotel owners can reduce energy consumption up to 30 percent. When factoring lower power bills, the hotel can recoup initial installation costs in less than 4 years. Architects and contractors can now modernize a hotel without running wires to the controls. No special wiring or networking expertise is required. 
• In a word, with Hotel Card key switch, facilities managers in the hospitality industry can easily comply with current energy save without compromising guest comfort and satisfaction

All products are firstly packed in airbags, then place into foam boxes,delivery cartons,which properly prevents the parts scratching each other.For screws and bolts, strikes, they are properly packed in a polybag and delivered with each lock. The inner boxes are separated from each other to avoid rubbing.The shape of the box is designed in rectangle. As we have more than 10 years hotel lock experiences, this kind of packing is good for transportation, storage. For more details, please refer below pictures.