orange peel aluminum coil, stucco aluminium pipe cladding, tubing insulation jacket
orange peel aluminum coil
Aluminum jacketing is available in Smooth, Stucco Embossed, Corrugated (cross-crimped) finishes, with or without moisture barrier (craft paper and poly surlyn).
Stucco embossed finish hides small imperfections and scratches caused by physical damage during or after installation, and reduces sunlight reflection. It's also called "orange peel" pattern.
| Thickness(inch) | Thickness(mm) | Width(mm) | Length(m) | Suggested Application |
| 0.016 | 0.4 | 914, 1000, 1219 | 30, 60, 90, coil or sheet | OD below 36"(914mm) insulated lines |
| 0.020 | 0.5 | 914, 1000, 1219 | 30, 60, 90, coil or sheet | OD below 36"(914mm) insulated lines |
| 0.024 | 0.6 | 914, 1000, 1219 | 30, 60, 90, coil or sheet | OD 36"-8′ (914mm-2.43m) insulated lines&equipment |
| 0.032 | 0.8 | 914, 1000, 1219 | 30, 60, 90, coil or sheet | special applications where extra thickness and protection is required, such as fabricated tank head covers and other special fabrications |
| 0.040 | 1.0 | 914, 1000, 1219 | 30, 60, 90, coil or sheet | special applications where heavy mechanical is required |
| 0.050 | 1.2 | 914, 1000, 1219 | 30, 60, 90, coil or sheet | flat ducts or precipitators. Also recommended for areas subject to high wind conditions |
Remarks: Other sizes available upon request.
Chemical Composition
| Alloy | Si | Fe | Cu | Mn | Zn | Mg | Ti | Cr | Other Elements | Al | |
| Each | Total | ||||||||||
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.05 | 0.03 | 0.03 | - | 0.03 | 99.6min | |
| 1100 | Si+Fe=0.95 | 0.05-0.20 | 0.05 | 0.10 | - | - | - | 0.05 | 0.15 | 99.0min | |
| 3003 | 0.6 | 0.7 | 0.05-0.20 | 1.0-1.50 | 0.10 | - | - | - | 0.05 | 0.15 | reminder |
| 3105 | 0.6 | 0.7 | 0.30 | 0.30-0.80 | 0.40 | 0.20-0.80 | 0.10 | 0.20 | 0.05 | 0.15 | reminder |
| 5005 | 0.3 | 0.7 | 0.20 | 0.20 | 0.25 | 0.50-1.10 | - | - | 0.05 | 0.15 | reminder |
Also Can be Applied with Craft paper.
Mineral Rock Wool Board Aluminum Sheet
Ecoin aluminum sheet can be used as (application):
-
Aluminum Jacketing is recommended for HVAC, Insulated Piping, Tanks & vessels less than 8 feet in diameter.
-
Deep corrugated sheets are recommended for diameters greater than 8 feet.
-
Chemical Plants & Refineries: Distillation columns, tank farms, fractionation units, cokers and ethylene production units.
-
Paper Mills: Chemical storage tanks, breechings and ducts.
-
Steel Mills: Pickle acid tanks, oxygen production units, fuel oil and tar storage tanks.
-
Miscellaneous: Power station, Food processing plants, LPG storage units, LNG storage units, sewage and waste water treatment plants.
We also have small roll packing.
Tianjin EcoIn Tech Co.,Ltd
Tianjin EcoIn Tech Co.,Ltd is a company specialized in new tech insulation material manufacturing and export. Our aim is to provide Grade A non combustible Eco-Insulation, friendly to environment and human body, and affordable for clients.
EcoIn factory was set up in 1995, with the register fund of 15 million USD. We are now one of the biggest insulation factory in North of China, with the main products of fiberglass insulation, mineral rockwool insulation and aluminum jacketing system. Low bio-resistance mineral wool is under developing, and hopefully to be exported next year.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier