If you have any other question or any request,please feel free to contact Ms.Yetta.Mob/whatsapp:+8613431617773
NO. |
Inspection Item |
Unit |
European standards |
Inspection Result |
Qualified or failed |
1 |
Length & width |
mm |
±0.6 |
-0.01~+0.01 |
Qualified |
±0.5 |
-0.01~+0.01 |
Qualified |
|||
2 |
Thickness |
% |
±5 |
-0.5~+0.75 |
Qualified |
3 |
Squareness |
% |
±0.2 |
-0.03~+0.04 |
Qualified |
4 |
Water Absorption |
% |
≤0.5 |
0.09 |
Qualified |
0.09-0.12 |
Qualified |
||||
8 |
Breaking Strength |
N |
Thickness≥7.5mm, not less than 1300N |
2036N |
Qualified |
6 |
Rupture Modulus |
Mpa |
Average≥35 Mpa |
40.6 |
Qualified |
39.10~40.60 |
Qualified |
||||
7 |
Resistance to surface abrasion of glazed tiles |
- |
Report abrasion class and cycles passed |
Class 3 feature visible at 750 revolutions |
Qualified |
8 |
Crazing resistance |
- |
Required |
Fully resistant |
Qualified |
9 |
Slip resistance (Ramp test)* |
- |
Manufacturer to state value and test method used |
Mean overall acceptance angle 7.8° Slip resistance assessment group R9 |
Qualified |