Product Name: nylon sediment membrane melt blown water filter cartridge | |
• Micron Rate: 0.5-150micron | |
• Material: polypropylene | |
• Structure: 3-Layer | |
• Certification: NSF | |
• Type: Water Filter Parts | |
• Color: White | |
• Application: Water Purifier System/Pre Filter/RO System | |
Let's begin to communicate | |
Contact us |
By spedial production technology to control the diameter of PP fiber , the micron rate of filter cartridge is controlied.Removing efficience can reach 98%.
The suiface layer of the filter cartridge is designed to be low dendity to assure the high dirt-holding capability , while the inner layer is hidher density to keep the accurate filtration ability to small particles. The density is 30% higher filtration eftect than the general type.
Large amount of sewage |
♦ Filtration of sediment, rust and other turbid substances in water
♦ Depth filtration, efficient and stable removal of impurities in water |
Stratified filtration |
♦ The three layer filtration integrates the surface, deep layer, coarse and fine filtration
♦ Without any chemical agents, more hygienic and safer |
Uniform pore diameter |
♦ Acid, alkali and organic compounds have good chemical stability
♦ 30% filtration capacity is increased by compared to other non gradient products |
PP Sediment melt blown filter carrtridge operating data
Operating temp | Filtrationlife | MAX.operating | Micron rate | MAX.flow |
4℃-52℃ Softening Point: 120℃ |
10” Standard: 3-6months/2500G 10” Big Blue: 4-6months/5500G *Depends on water quality and leval of contaminants |
60psi |
0.5,1,5,10, 25,50,75, 100,150μm |
10” Standard: 2.5GPM 10” Big Blue: 5GPM (1.5-2kg/cm2) |
Ntlon Sediment melt blown filter carrtridge operating data
Operating temp | Filtrationlife | MAX.operating | Micron rate | MAX.flow |
4℃-52℃ Softening Point: 180℃ |
10” Standard: 3-6months/2500G 10” Big Blue: 4-6months/5500G *Depends on water quality and leval of contaminants |
60psi |
0.5,1,5,10, 25,50,75, 100,150μm |
10” Standard: 2.5GPM 10” Big Blue: 5GPM (1.5-2kg/cm2) |
Specification table
Model No. | Length(inch) | O.D(inch) | I.D(mm) | Qty(pcs/CTN) | Ctn size (cm) |
PP5 | 5 | 2.5 | 28,30 | 100 | 32×32×52 |
PP10 | 10 | 2.5 | 28,30 | 50 | 32×32×52 |
PP10P | 10 | 2.5 | 28,30 | 50 | 32×32×52 |
PP10E | 10 | 2.5 | 28,30 | 50 | 32×32×52 |
PP10C | 10 | 2.5 | 28,30 | 50 | 32×32×52 |
PP10G | 10 | 2.5 | 28,30 | 50 | 32×32×52 |
PP510T | 10 | 2.5 | 20 | 25 | 36.5×36.5×36.5 |
PP510BB | 10 | 4.5 | 28,30 | 10 | 58×24×52 |
PP520G | 20 | 2.5 | 28,30 | 25 | 32×32×52 |
PP20 | 20 | 2.5 | 28,30 | 25 | 32×32×52 |
PP20BB | 20 | 4.5 | 28,30 | 10 | 58×24×52 |
PP30 | 30 | 2.5 | 28,30 | 25 | 32×32×77 |
PP40 | 40 | 2.5 | 28,30 | 25 | 32×32×102 |
Q: Are you trading company or manufacturer ?
A: We are factory and trading company.RO equipment system /industry water softener/home water softener manufacturer
Q: How long is your delivery time?
A: Generally it is 3-10 days if the goods are in stock. it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q:How long time in water treatment?
A: We have 18years experience in water treatment equipment/water treatment solution