onekin greenboard introduction
Onekin green board is a fire proof and a thermal insulation building material.
It’s created by magnesium oxide, magnesium chloride, fiberglass mesh, non-woven fabric etc
It’s widely used for all residential, commercial, industrial and institutional construction,
such as wall and ceiling linings, exterior cladding, soffits, tile backing and flooring underlay.
It’s a good example of the advances made in construction materials to meet changes in building codes for safety and durability.
application
fireproof A1grade
fireproof:6mm ≥1 hour
6-12mm: 1-2 hours
12mm above≥2 hours
Non-combustible at 800℃ and no flames at 1200℃
raw material
magnesium oxide
magnesium chloride
Magnesium sulfate
fiberglass mesh
Environmental Health & Energy Efficiency
100% asbestos free
No toxicity
No formaldehyde
Insect-resistance
High-Strength and Lightweight
Bending Strength: 18.8Mpa (10mm)
Impacting Strength: 8.3 kJ/m2(10mm)
Nailing strength: 86N/ m2
Ease of use and application
Drywall fast and easy installation
Water resistant and not affected by moisture
Water absorption: about 18%
Temperature 32℃, relative humidity 96%, no water and no moisture created after 72 hours
Sound and heat insulation
Sound insulation: 29dB (6mm)
Thermal conductivity: 0.161 W/(m•K)
test report
MGO board |
1. do you have CE cetificate? |
Yes, we have this certificte,please find attachment? |
2. your board price? |
We have three board for different function. May I know the use of your board and the quantity?I will provide you the suitable board and the best price. |
3. your board is too expensive than ther suppliers |
We have three boards, different board is different price with equal quality. Please compaire the test data with other suppliers. This is the fireproof video feedback by our customer. we can provide sample to you for test. |
4. Whats is the difference of your A&B board |
Board A is made from MgSO4, Board B is made from MgCl2. i've made a comparison sheet for you, please find attachment. |
5. What the strength of your board? |
Please kindly check the attached ASTM test report, you can find the data on it. And this is our load testing picture. |
6. how to install your board? |
The installation process is on our catalog, please kindly check page 19-20 |
7. i need some for ceiling and floor |
for ceiling you can use 6-8mm, for floor, thckness need more than 15mm. |
8. Can i paiting on it? |
Yes, can our mgo board is decoration base board, you can paiting, use wall paper. |
9. do you have other color? |
Yes, we can do different color according to your requirement. Currently, we just have two culor, grey and white in stock. |