PU/PVC Primer Nylon Primer for plastic slippers
Product information | |
Main Component | Synthetic resin |
Shelf Life | 6-12months |
Appearance | transparent liquid |
PH | 6-8 |
Packaging | 14L/barrel(12kg) or according to your advance request |
Pot life |
2hrs (After mixing hardener) Add 3-5% hardener: Used within 2 hours for best bonding performance. |
Other models | 08P 02P |
PU/PVC Primer Nylon Primer for plastic slippers
APPLICATIONS & CHARACTERISTICS
08P is PVC,PU primer which is used to treat PVC,PU,nylon cloth materials. When used together with PU adhesives, better bonding strength can be achieved.
Applications |
Bonding adhesive pvc primer NOTICE
1. Store temperature over 40℃ must be avoided. The product is sensitive to frost and should not be kept at temperature lower than 5℃. It is irreversible after freezing.
2. Frozen 02P is irreversible. The containers must be kept properly and well sealed, otherwise, it will form film as a result of water evaporation.
3. It is suggested that leather should be buffed completely and make it hairy before priming
4. In order to help the primer to penetrate into the material, please brush up and down during operation.
5. In order to improve the appearance of the dried cement, addition of no more than 3% color paste specially made by Nan Pao into 02P is needed.
6. Keep away from fire, store in cool, dry, well-ventilated place.
7. Operators must wear PPE.
Bonding adhesive PU primer OPERATION METHOD
1.Shoe materials → pre-treatment → 08P+ 5%Hardener → Drying→ cement
2.Drying Condition: Traditional Oven : (55 ℃ ± 5 ℃) X 3’-5’
NIR : (55 ℃ ± 5 ℃) X 2’-4’
NIR+MIR oven condition:(50℃ ~ 65℃) X 90"~180"
PS: Drying condition is suggested to set according to the operation of different materials, and special models.
Note: Recommended Hardener is RC.
1. NIR oven drying condition is suggested to set according to the operation of different models, and special models.
2. For special models with NIR oven, the operation needs to be adjusted according to factories’ condition
(e.g. oven, Layout…).
When the drying condition is continuous two sections: Recommended the first section Low-temperature drying (35-45℃x3’-4’) and the second section drying (50-60℃x3’-4’) The thickness of the adhesive on the materials should be enough and even to make sure its adhesion effect.
3. Before factories adjust the drying condition based on the different types of NIR+MIR ovens, must make
sure the bonding test is passed. For adhesive's film-forming ability, when adjust the drying condition, time-no less than 90",temperature- no higher than 65℃.
4. For special shoe types or porous material such as mesh, factories can adjust the NIR+MIR oven time (if necessary, prolong it)and temperature depending on actual inner trial test for bonding and drying with FTY
CEs. By no means should the temperature be higher than 65℃.
Q1. About the sample?
A: we can provide free sample,but customers should pay the freight charge.
Q2. What about the lead time?
A:Sample needs 5-7 days, mass production time needs 1-2 weeks for order quantity more than
Q3. Do you have any MOQ limit for order?
A: Low MOQ, 1pc for sample checking is available
Q4.Why choose us?
1. Over 20 years glue making experience.
2. One-stop chemical solutions.
3. Strong technical support.
I 4. Complete quality control process.
Q5. How to proceed an order for adhesive?
A: Firstly let us know your requirements or application. Secondly We quote according to your requirements or our suggestions. Thirdly customer confirms the samples and places deposit for formal order. Fourthly We arrange the production.
Q6. Is it OK to print my logo on the product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.