Copper NICKEL ALLOY MIG ROD ERNi-1
Application
ERNi-1 (NA61) is used for GMAW, GTAW and ASAW welding of Nickel 200 and 201, joining there alloys to stainless and carbon steels, and other nickel and copper-nickel bare metals. Also useed for overlaying steel.
class | ERNi-1 |
AWS: |
A5.14 |
Conforms to certification: | ASME SFA A5.14 |
weld process | GMAW welding process,GMAW |
Chemical composition of deposited metal(%)
C | Cu | Mn | Ni | Fe | AL | P | Ti | S | Si |
0.06 | 0.02 | 0.30 | Balance | 0.10 | 0.50 | 0.008 | 3.0 | 0.003 | 0.40 |
Deposited metal properties%
Tensile Strength | Yield Strenth | Elongation |
66,000psi | 38,000Psi | 28% |
Recommended Welding Parameters for MIG and SAW Welding of Nickel Alloys | ||||
Process | Diameter of Wire | Voltage (V) | Amperage (A) | Gas |
MIG | .035 inches | 26 – 29 | 150 – 190 | 75 % Argon +25% Helium |
.045 inches | 28 – 32 | 180 – 220 | 75 % Argon +25% Helium | |
1/16 inches | 29 – 33 | 200 – 250 | 75 % Argon +25% Helium | |
SAW | 3/32 inches | 28 – 30 | 270 – 350 | Suitable Flux May Be Used. |
1/8 inches | 29 – 32 | 350 – 450 | Suitable Flux May Be Used. | |
5/32 inches | 30 – 33 | 400 – 550 | Suitable Flux May Be Used. |
Note:
1,Other shielding Gases may be used for Mig welding. Shielding gases are chosen taking Quality, cost, and Operability into consideration.
2,Both agglomerated and fused fluxes can be used for submerged arc welding
3,The chemical composition of the flux mainly affects the chemistry of the weld metal and consequently its corrosion resistance and mechanical properties.
15kgs/spool,1ton/pallet
About Us
Lin’an Dayang Welding Material Co.,Ltd., located in the western part of Hangzhou, was established at the beginning
of this century. It is a specialized company, which develops and produces all kinds of welding materials. We
concentrite on profession, science and technology innovation, adopt advanced technology and equipment,
to implement international quality standard.
Product Picture