new design cost saving biomass pelletiser machine wood pellet machine buyers
Name | Biomass Wood Pellet Mill Machine |
Model | LKJ560/LKJ700/LKJ850 |
Type | Vertical ring die type |
Output/Capacity | 1-3t/h each set |
Transmission | Special Design Motor and Reducer |
Main Motor Power | 90kw/132kw/160kw/185kw |
Lubrication System | Cost-saving gear oil , |
Independent cooling Motor | Better heat dissipation |
Material of Die Mould | Stainless steel 4Cr13, Doube layer |
Main Machine Body | Casting body after heat treatment |
automatic alarm system | detect oil pressure and predict mantainance |
Pellet Diameter | 6mm,8mm,10mm, 12mm |
Pellet Length | Can be customized made |
Advantage points of our pellet machine
1.Ring die, vertical structure,feeding vertically,no arching of raw material,easy for heating dissipation
2.Die static, rollers rotating, materials centrifugal, evenly distributed around
3.Double-layer dies,up and down dual-use,high capacity,saving energy.
4.Efficiency high overload capacity,low noise
5Small viration,reliable structure,beautiful appearance
6.Wood pellet mill can press 6-12mm pellets diameter,if you need different pellets diameter,just change the different ring die is ok.
7.Pellet mill power supply is 380v,50hz,3phases,we also can design the special motor for you,like 220v,415v,60hz,3phases.
Specifictions of wood pellet mill machine:
Type | Power(kw) | Pellets(mm) | Model(mm) | Output(t/h) | Dimension(mm) | Weight(t) |
LKJ560 | 90/132 | 6/8/10/12mm | φ548 | 1-2t/h | 1600*1210*1700mm | 4.5 |
LKJ700 | 132/185 | 6/8/10/12mm | φ700 | 2-3t/h | 1650*1261*1783mm | 5.5 |
LKJ850 | 185/220 | 6/8/10/12mm | φ850 | 3-3.5t/h | 1800*1450*1850mm | 7 |
Special motor and reducer for wood pellet machine
Motor: The first special motor for wood pellet machine only, the power output efficiency is increased by more than 10%, the power density of each center height can reach 3-5 times, the voltage and frequency tolerance range is wide, and it is more suitable for operation under harsh environmental conditions. It is energy saving and safety stable.
Reducer is a special reducer for wood pellet machine designed and developed by ourselves. It shields the short plate of ordinary industrial reducer in the operation of pellet machine. It adopts finite element design and parallel hard tooth surface gear transmission. step by step and other strength, even if the high temperature, lack of oil or load instantly increased to 3-4 times normal, it can still operate normally.
Application of the pellet machine
LKJ series is mainly applicable for difficult molding materials with low adhesion rate, for example husks like rice husk, sunflower husk, peanut shell coffee shell and fruit shell; Wood branches, stems,trunks,barks,, rind EFB sawdust and other wood waste; a variety of crop straws such as corn stalks,wheat straw,rice straw cotton straw; waste such as rubber, cement, ash and other fertilizer materials.
The pellet fuel is a new type of bioenergy. It can replace wood, raw coal, fuel oil, liquefied gas, etc., and is widely
used in heating, life stoves, hot water boilers, industrial boilers, biomass power plants, chemical plant etc.
Jinan Taichang Transmission Machinery Co.Ltd was founded in 2004 with registered capital of 8 million Yuan(USD 1,400,000.00),plant building area of 40000 square meters .More than 200 employees, including 10 senior engineers, 16 mechanical designers, 20 technicians, and is a research, development, production, operating as one of the modern machinery manufacturing enterprises. Strong technical force, advanced production technology, perfect after-sales service. Our company is the largest professional manufacturer with all types and large production in the domestic same industry.
FAQ:
1. What's the delivery time?
We will deliver the product in 20-30 days after the contract.
2. What's your payment terms?
L/C, T/T or negotiation.
3. What's the working life for the wearing parts( die and rollers )
1500-2000Hours .
4.What capacity would your prefer?
The capacity of our LKJ series model sawdust pellet mill is 1-3T/H each set, smaller and higher capacity can be also designed.
5.What is your raw material?
According to different raw material(such as hard wood,softwood,straw,rice husk), capacity is different.
6.What is your raw material size?
Best size for pressing high quality pellets is 3mm.
7.What is the moisture of your raw material?
Better to be 15-20%.
8 Can you do a whole pellet line?
We can also manufacture wood chipper, hammer mill, drying machine, cooling machine, conveyors and so on.
Please just tell us your raw material name and the capacity you need, we will make flow chart for you and give the best suggestions.