Materials | NBR, HNBR, EPDM, SILICONE, FKM, FVMQ, CR, PU, etc. |
Temperature |
NBR: 1) Standard -40°C ~ +120°C; 2) Special -50°C ~ +120°C
HNBR: 1) Standard -35°C ~ +180°C; 2) Special -40°C ~ +180°C
EPDM: 1) Standard -40°C ~ +150°C; 2) Special -55°C ~ +150°C
SILICONE: 1) Standard -55°C ~ +200°C; 2) Special -85°C ~ +280°C
FKM: 1) Standard -13°C ~ +250°C; 2) Special -40°C ~ +300°C
FVMQ: 1)Standard -55°C ~ +225°C; 2) Special -65°C ~ +280°C
CR: 1) Standard -35°C ~ +120°C; 2) Special -40°C ~ +125°C |
Hardness | 30~90 Shore A |
Sizes | Standard AS568, BS4518, GB/T 3452.1, JIS B2401 and Custom non-standard sizes, etc. |
Colors |
Black, blue, brown, green, gery, red, orange, white, transparent, yellow, purple or custom colors; |
Applications | Household appliance, electron industry, food industry, drinking industry, etc. |
Certificates | IATF 16949:2016, ISO13485:2016, ROHS, REACH, |
Features |
NBR: Oil resistant, waterproof, anti-solvent, high pressure oil resistant, etc.
HNBR: Superior heat, ozone, chemical resistance and mechanical characteristics over standard NBR.
EPDM: 1)Resistance to ozone, sunlight, weathering, and excellent resistant to waterproof & chemical resistance; 2)Can be used for alcohols and ketones, high temperature steam resistance, good gas impermeability;
SILICONE: Applications are atomotive, aerospace, applicance,medical, electrical and consumer industries. High transparency and excellent mechanical and electrical properties, etc.
FKM: Excellent resistantce to high temperature, ozone, weather, oxygen, mineral oil, fuels, hydraulic fluids, aromatics and kinds of organic solvents & chemicals, much better heat resistance than silicone.
FVMQ: Excelent resistance to high & low temperature and good resistance to oil, solvent, fuel oil, etc.
CR: Good resistance to sun, ozone, weather, and performance well in contact with fire resistance, chemical corrosion resistance. |
Xinhuaxu (Singwax) Rubber Products Co., Ltd. is a leading global manufacturer of high quality hydraulic and pneumatic seal kits, gaskets,o rings,dampers,plugs,bellows,bumpers,bushes,washers,suction cups and other custom rubber parts.
We've achieved ISO9000/TS16949 certificate. We could produce both as custom design and AS568, DIN3771, JIS B2401, GB 245201 and ISO3601 standards
Workshop
1) Over 16 years manufacturering experience;
6000+ sets of mould available
230+ employees
2) 100% inspected before shipment;
3) OEM/ODM available;
4) Free sample available if in stock;
5) US$25 sample cost needed if no mould available, but it will be returned after the order released
6) New O-Rings mold cost will be return back after orders AMT > $4,400;
7) New Gaskets mold cost will be return back after orders AMT > $7,300;
8) Certification: ISO13485, IATF16949
9) LT: 10~25 days
By the way, if possible pls advise below infomation for quick and exact quotion for you.
Material | |
Hardness | |
Dimension(ID*CS mm) | |
Qty | |
Application | |
Certification | |
Any special request | |
Drawing(2D or 3D) (Especally for gaskets & OEM rubber parts) |