multitool blades for cutting wood or metal

  Professional Metal BandSaw Band Saw Blades for Wood Metal 

Tips:
The new blade before you use must be run-in. Running a no or no run-good life of blade is a good run-in blade 1/3 or less. When the blade can only use half the normal run-feed pressure / rate and cutting speed, until the sawn surface area 300-1000cm2. Then gradually the feed rate and cutting speed to normal.

And here is our test result :

Use the following method, maybe you can get a longer saw blade life:
1 .. The new saw blade when in use, within the first two hours, only with half the usual rate cut sawing, then gradually increase the speed to normal speed cut
2 .. Sawing three hours later, set the saw blade slightly retensioning number
Be sure to relax on the saw blade Saw

3. After work, in order to avoid metal fatigue, fracture, remember next time you use certain tension.

Feature:

• Application of band saw blade is very broad, general used in machinery industry, machinery manufacturing, automotive service industry, metal mining industry, and so, therefore, we must first select the appropriate band saw blades for cutting material which, in order to achieve the best cutting effect, there is based on blade cutting material choice for large diameter steel on coarse tooth blade for cutting required, otherwise the best choice for relatively modest fine-tooth blade, there is to regular equipment maintenance and maintenance, so as to greatly improve work efficiency, but also help to save costs.