| |
Maximal frequency | V / F control: 0: 400 Hz |
Carrier frequency | 1.0kHz~16kHz |
Input frequency resolution | Digital setting:0.01Hz |
| Simulation setting:maximal frequency×0.025% |
Control method | V/F control |
Pull-in torque | G type machine:0.5Hz/150%(SVC) |
Overload capacity | G type machine:150 % rated current 60s ; 180 % rated current 3s |
Communication port | RS485 interface MODBUS-RTU communication protocol default 9600 baud rate |
Input port | 4 external terminal input(X0-X3) |
Output port | 1 relay output, 1 transistor output (DA output can be achieved) |
External analog | 1 external analog input support 0-5 VX 4-20MA (jumper required) |
Torque boost | Automatic torque lifting; manual torque lifting 0.1% |
V / F curve | Three ways: linear type; multipoint type; N sub square V/F curve (1.2 power, 1.4 power, 1.6 power, 1.8 times, 2 times). |
V / F separation | Two ways: total separation, semi-separation |
Acceleration and deceleration curve | Linear acceleration and deceleration mode. Time range 0.0~6500.0s |
DC injection braking | DC braking frequency:0.00Hz~ maximun-frequency braking time:0.0s~36.0s Braking current value:0.0%~100.0% |
electronic control | Point frequency range: 0.00Hz~50.00Hz.~6500.0s |
Simple PLC, multi-stage speed operation | Running at up to 16 segments by built-in PLC or control terminal |
Built-in PLC | The closed loop control system of process control can be realized conveniently |
Overpressure and overcurrent stall control | Automatic limitation of current and voltage during operation to prevent frequent overvoltage and tripping |
Fast current limiting function | Minimize overcurrent failure and protect frequency converter from normal operation |
Defencive function | Electrical motor short circuit detection, input and output phase deficiency protection, overcurrent protection, overvoltage protection, overheating protection, overload protection |
LED display | Display parameter |
Key locking and function selection | Implement partial or full locking of the keys and define the range of action of the partial keys to prevent misoperation |
Place of use | Indoor, not exposed to direct sunlight, dust, corrosive gas, flammable gas, |
Above sea level | Less than 1000m |
Ambient temperature | -10℃+40℃(The ambient temperature is 40 ℃ ~ 50 ℃, please reduce the amount used) |
Humidity | Less than 75 RH, no condensation of water droplets |
Vibrate | Less than2.9m/s2(0.3g) |
Storage temperature | -20℃~+60℃ |