1.General description
Structured with highly sensitive piezoceramic sensing elements, Ceramic Shear IEPE Accelerometers have an excellent signal-to-noise ratio, high measurement resolution, and are ideal for conducting low-level vibration measurements. Due to their inherent higher sensitivity, a ceramic IEPE accelerometer can be assembled with a smaller mass than comparable quartz units, resulting in a sensor that is lighter in weight, has a higher frequency response, and has a lower noise floor.
To further reduce the mass of the sensors, all ceramic shear accelerometers are housed in either tough, lightweight, laser-welded, hermetically sealed, titanium or aluminum housings. By minimizing the mass of the sensor, mass loading effects are reduced, which maximizes the accuracy of the data obtained.
2. Applications
1) Environmental Testing
2) Component Qualification
3) Structural Testing
4) Operational Behavior Studies
5) Fatigue Testing
6) Vibration & Sound Cancellation
7) Circuit Boards
8) Components
9) Small Assemblies
3.Specifications
Model:TL | 261A05 | 262A05 | 263A03 | 264A03 | 266A01 | |
263A03Z | 264A03Z | 266A01Z | ||||
Sensitivity | pC/g | 5 | 5 | 3 | 3 | 1 |
Measurment Range | g pk | ±2000 | ±2000 | ±3000 | ±3000 | ±2000 |
model: TL | 161A10 | 161A50 | 161A100 | 162A10 | 162A50 | 162A100 | 163A10 | 164A10 | |
163A10Z | 164A10Z | ||||||||
Sensitivity | mV/g | 10 | 50 | 100 | 10 | 50 | 100 | 10 | 10 |
Measurment Range | g pk | ±500 | ±100 | ±50 | ±500 | ±100 | ±50 | ±500 | ±500 |