micro pressure gauge digital differential pressure gauge manometer

micro pressure gauge digital differential pressure gauge manometer

Description micro pressure gauge digital differential pressure gauge manometer

Micro air digital differential pressure gauge transmitter using variable capacitance sensor technology, the smallest range 0-25 pa, the use of imported micro-core with superior sensitivity and long-term stability, wall and embedded installation optional, suitable for the clean room, Operating room and so on clean environment GMP standards. Products elegant, can expand two control output, arbitrarily set the alarm value, the current voltage signal output MODBUS485 signal output, buzzer alarm optional.

Detailed Images micro pressure gauge digital differential pressure gauge manometer

Specification micro pressure gauge digital differential pressure gauge manometer

Medium: air and non-flammable, non-corrosive gas, insensitive to moisture / dust / condensation / oil
Medium temperature: 0-60 ° C
Housing: Cast aluminum housing, PC panel
Working environment: -20-85 ° C
Temperature compensation: full process
Working pressure: 1, 2, 5kPa, depending on the range; Overload 5xFS, damage pressure 10xFS
Size: see size chart
Process connection: NPT1 / 8 pagoda joints, two pairs (side or back)

Display: LCD
Analog output: 4-20mA (two wires)
Output load: ≤250Ω
Display: 4 bits LCD, with engineering unit, with backlight (except D5)
Output load: ≤500Ω(current), ≥2KΩ(voltage)
Accuracy: ±1.0% FS
Temperature drift coefficient: <0.05% FS / ° C
Response time: 12s
Power: 24V DC
Buttons: 3 touch buttons
Protection level: IP65
Weight: about 470g

Features micro pressure gauge digital differential pressure gauge manometer

1.Using high-precision MEMS sensor and digital technology, it can detect positive pressure, negative pressure or differential pressure
2.Widely used to measure the pressure of fans and blowers, filter resistance, wind speed, furnace ventilation, pressure drop caused by orifice plates, the level of foaming system and pressure of supercharger or hydraulic system
3.Used to monitor blood and respiratory pressure on medical equipment
4.With flush mounting and flat mounting etc
5.Various ranges, output methods and units are optional
6.No moving parts, anti-vibration
7.Has a large and super LCD display
8.Optional 2 sets of relay output or alarm, and LCD indication
9.Standard accuracy up to ± 1% FS
10.Key functions: zero calibration, unit switching, relay setting, recording function time setting, span calibration, etc

Company Information