micro anti corrosive marine sea water washing and cleaning diaphragm pump
pump design: seawater cooling pump
body material: ferrite ceramic
motor tape: permanent magnet motor
port size: 3/4"(20mm) 1"(25mm)FPT, 1/2"(15mm)MPT
liquid temp: 54 degree
typical application: sea water cooling, marine, yacht, industrial, fishnery etc.
this series are magnetically driven pump, with no shaft seal. the pump is epoxy encasulated, which allows the pump to run fully submerged in many liquids or in open air for complete moisture protection. the hardened carbon bushing allows for extended run dry time without any damage to the pump head. the pump has run dry and thermal overload protection. it is can not self priming and require a flooded suction
model | volt | frequ | Amp | flow | pressure | lift max | power |
v | hz | A | LPM/GPM | PSI/BAR | m | w | |
PM500-1 | 115 | 60 | 2.0 | 31/8.5 | 25/1.7 | 19/5.7 | 120 |
PM500-1 | 230 | 60 | 1.0 | 31/8.5 | 25/1.7 | 19/5.7 | 120 |
PM500-2 | 115 | 50 |
2.0 |
31/8.5 | 25/1.7 | 14/4.3 | 137 |
PM500-2 | 230 | 50 | 1.0 | 31/8.5 | 25/1.7 | 14/4.3 | 100 |
PM1000 | 115 | 60 | 0.9 | 54.8/14.5 | 50/3.4 | 27/6 | 207 |