Product Name | AM-10 XG-23A Pneumatic Scissors | |
Place of Origin | Guangdong, China | |
Brand Name | OPT | |
Applicable Mask Types | Both Flat and KN95 Masks | |
Brand | OPT Original | |
Certification | CE/ISO9001 | |
Cutting edge size | 43mm L x 17mm Openning Cut | |
Coating | Teflon antirust coating | |
Material | SK5 hard alloy steel | |
The Cutter Head | Replaceable | |
Sealing Ring | Imported | |
Service Life | 1,000,000 Times Cutting | |
Pneumatic scissors notes: First, note that the specified air pressure body size is used by the body. The different air pressure size is too small to affect the blade ability, but too large will easily cause the blade damage and the internal piston fracture of the body; 2. The center screw between the blade and the body is made of special material. Replacement screws shall not be used, which may cause damage to the blade due to "reaming" of the body screw. 3. The blade shall not use anything other than the prescribed items and beyond the standard of capacity value; 4. The air pressure should be closed and avoided when changing the blade; 5. Avoid falling of body and blade; 6. If the body has a handle, it shall not be adjusted by itself so as not to cause operation failure; Use method of pneumatic scissors I. Before the blade and body are installed, make sure the air pressure (air compressor) is closed; 2. Confirm the air pressure stipulated by the body (the air pressure used by the body size is also different); 3. Use the blade as far as possible in the median working length of the blade; After use, the air pressure (air compressor) must be turned off. Simple maintenance of pneumatic scissors Air compressor must connect the filter device, in order to avoid internal corrosion caused by moisture caused the blade and ontology blade available oil wipe antirust effect internal body appearance may also serve as a apart will spring and piston with dry cloth to wipe clean and butter as well as aging and check whether the piston ring is like cutting ability problem please check whether the pressure is on whether to use range and the blade damage or deformation. |