Traffic Signs Road Marking Thermoplastic Equipment
Feathers:
1) Hand-Push thermoplastic road marking machine marking width is 100, 150, 200, 300mm, and thickness is 1.5-2.5mm through adjusting the screeding knife. |
2) Ideal machine for medium-sized and small marking jobs in urban areas and road. |
3) The screeding structure makes the markings straight and beautiful. |
4) Easily operative to ensure the marking speed and quality. |
5) Dual-use machine,also can change marking shoe for zebra crossing marking. |
Hand push type screeding marking machine road marking machine Main Parameters
No. |
Item |
Spec. |
1 |
Paint Tank |
55L (Erect type stirring device, Heating and keeping the temperature automatically) |
2 |
Marking Mode |
Screeding with marking shoe |
3 |
Marking Shoe=Line Width |
100/150/200/300/400/450mm (Optional) |
4 |
Glass Beads Bin |
12L (Bin with window, which can check the quantity of glass beads) |
5 |
Glass Beads Dispenser |
Automatic quantitative dispenser synchronous with the paint screeding system |
6 |
Standard Configuration |
150mm Marking shoe (High temperature, oxidation and deformation resistance) |
7 |
Rear Wheel Directional Device |
Ensure the machine moving in straight line or turning freely in curved road |
8 |
Guide Rod |
Hydraulic guide rod |
9 |
Size and Weight |
1210*890*970mm 165kg |
Hand push type screeding marking machine road marking machine optical part :
Marking shoe:
Roll booster ( optical drive part )
Hand Push thermoplastic road marking machine package& shipping
Hand Push thermoplastic road marking machine working relative marking equipment and material
Thermoplastic road marking paint :
Physical Characteristics |
|
|
Appearance Colour |
White/Yellow |
|
Density (g/cm3) |
2.01 |
|
Softening Point (°C) |
103 |
|
Drying time of no sticking to wheel (minute) |
3 |
|
Luminance factor |
White |
0.81 |
Yellow |
0.51 |
|
Compression Strength(Mpa) |
19.1 |
|
Flow Resistance (%) |
36 |
|
Glass Beads Content (%) |
21.8 |
|
Abrasion Resistance (mg 200r/1000g reduce weight) |
56.3 |
Glass beads spraying on road surface to increase the refletive
Improve the retro-reflection property of the road marking paint. |
When driving at night, the headlights flash on the marking line with glass beads which makes the headlights reflex back in parallel, so the driver could see the forward way clearly and the driving security is raised at night. |
Thermoplastic Paint |
Film Thickness |
Coverage Area |
Package |
Glass beads ( Spraying on road surface) |
1 ton |
1.5mm |
270 m2 |
25kg/Bag |
75kg |
Thermoplastic ( hot melt ) road marking paint pre heater :
No. |
Model |
Size |
1 |
JLZRF300 Hydraulic single cylinder pre heater |
Paint tank: 300L |
2 |
JLZRF450 Hydraulic double cylinder pre heater |
Paint tank:2*225L |
3 |
JLZRF500*2 Hydraulic double cylinder pre heater |
Paint tank: 2*500kg(1 Ton) |
Hand Push thermoplastic road marking machine application
JILI MACHINRY CO.,LTD PRODUCTION :
1. Thermoplastic road marking machine series; |
2. Cold paint road marking machine series |
3. Two-component road marking machine series |
4..Road marking remover series; |
5.Auxiliary road marking machine series |
Pre Heater for thermoplastic road marking machine
1) Pre heater and thermoplastic marking machine relationship
Pre-heater, always matched with thermoplastic marking machine, is main equipment for thermoplastic paint lines marking construction. |
Pre-heater is used for heating, melting, and stirring thermoplastic marking paints continuously, preparing hot melt paints for the thermoplastic machine during long distance road lines marking work |
2) How to use the pre heater
During the construction, put powder coating (additives) into the pre-heater firstly. |
Keep stirring while melting, until the paint into a homogeneous liquid state. |
And then, the hot-melt material is ready to be discharged into the thermoplastic machine for marking construction. |
The melting paint quality affects directly to the traffic lines marking quality, so the pre-heater is a key part during thermoplastic paint road lines construction, and essential device for thermoplastic paints heating and melting. |
JILI machinery supply three kind of road marking paint machine according to the paint material :
1. Thermoplastic road marking machine series; |
2. Cold paint road marking machine series |
3. Two-component road marking machine series |
According to different marking ways , the thermoplastic road marking machine can be divided into 3 type: |
1. Thermoplastic screeding type |
2.Thermoplastic extrusion type |
3. Thermoplastic spraying type |
The working type could be driving type marking, self propelled type marking or hand push marking . |
The thermoplastic road marking equipments needs a set of numerical equipments to compelet the construction . |
It is usually including the following parts. |
1. Thermoplastic pre heater |
2. Road marking machine |
3. Pre-marking machine |
4. Primer |
The cold paint road marking is different from thermoplastic road marking . It can complete only by one unit road marking machine. |
It can be divided into high pressue airless and low pressure air spray type |
The working type could be driving type marking, self propelled type marking or hand push marking |
We would like to be helpful for your road constricon.
Any question or need, pls contact us...