magnesium alloy plate az31b az31 az61
magnesium alloy plate az31b az31 az61
This standard covers magnesium tooling plate of one grade and quality offered for sale for use in jigs, fixtures, gauges and other applications.
Composition
Magnesium tooling plate is made to AZ31 composition shown in the Chemical Composition of Magnesium Tooling Plate table below. Tooling plate can be supplied to MIL-T-38749 on inquiry.
Chemical Composition of Magnesium Tooling Plate
Alloy | Mg | Al | Ca | Mn | Ih | Zn | Zr | Cu max. | Fe max. | Ni max. | Si max. | Other imp. max. |
AZ31 | Bal. | 2.5-3.5 | 0.04 max | 0.20 min. | - | 0.7-1.3 | - | 0.05 | 0.005 | 0.005 | 0.05 | 0.30 |
Properties
Typical mechanical properties os AZ31 tooling plate are shown in the table below. Minimum properties are not guaranteed.
Thickness, inches | TS, ksi | TYS, ksi | Elong. in 2″, % | CYS, ksi |
0.250-6.000 | 35 | 19 | 10 | 10 |
Standard Sizes
Thickness | Size | ||
.250, .375 | 48″x 96″ | 48″x 144″- | - |
.500, .625, .750, 1.000 | 48″x 96″ | 48″x 144″ | 60″x 144″ |
1.250, 1.500, 1.750 | 48″x 96″ | 48″x 144″ | 60″x 144″ |
2.000, 2.500, 3.000 | 48″x 96″ | 48″x 144″ | 60″x 144″ |
3.500 | 48″x 96″ | - | - |
4.000 | 49″x 84″ | - | - |
5.000 | 49″x 72″ | - | - |
6.000 | 49″x 60″ | - | - |
Special Inquiries: For thicknesses over 6 inches, widths over 60 inches, and non-standard lenghts.
Tolerances
Thickness
Thickness – maximum variation in gauge within a plate ± 0.010 plate to plate variation | |
Specified thickness, inches | Tolerance ±, inches |
0.250-0.750 | 0.010 |
0.751-1.250 | 0.017 |
1.251-2.000 | 0.025 |
2.001-3.000 | 0.050 |
3.001-3.250 | 0.065 |
3.251-3.500 | 0.080 |
3.701-4.000 | 0.110 |
4.001-5.000 | 0.125 |
5.001-6.000 | 0.135 |
Width and Length Tolerances
Specified | Specified width of length, inch | |||
Up thru 10 | Over 10 thru 48 | Over 48 thru 72 | Over 72 | |
Tolerances, inch + | ||||
0.250-6.000 | 3/16 | 3/8 | 1/2 | 5/8 |
Flatness Tolerances
Specified | Deviation from flat*, inch | |||
In any 1 foot | In any 6 feet | |||
Guaranteed | Typical | Guaranteed | Typical | |
0.250-1.000 | 0.005 | 0.003 | 0.015 | 0.007 |
* Deviations from flat are measured from a straight edge placed on the surface of the plate.
Finish: The side suitable for tooling uses is stencilled. The opposite side is equal or superior to a mill finish.
Packing: Conforms to requirements of carrier through which shipment is made. Both domestic and export packing available.
Magnesium
Alloy and Form
· AZ31 / AZ31B – Rod, Tooling Plate
· AZ31B-H24 – Spec Grade – Sheet & Plate Sheet, Plate
· AZ91C – As cast or heat treated – Castings
· AZ91E – As cast or heat treated – Castings
· AZ80 – Bar
· EV31A – As cast or heat treated – Castings
· ZE41A – As cast or heat treated – Castings
· ZK60A – Bar, Sheet, Plate
Extruded Magnesium Alloys and Forms Available
Product details
| Magnesium Plates OEM | High Purity AZ31B AZ91 WE43 Magnesium Plates,magnesium sheet |
| Application | CNC engraving |
| Shape | sheet/plate/board |
| Chemical Composition | AI:2.5-3.5%;Zn:0.7-1.3%;Mn:0.20-1.0%;Mg:Balance |
| Process | Extruded/Casting |
| Size | thickness from 0.5 to 7mm; Max width is 600mm; Max. length is 1200mm |
| Other name | Magnesium Alloy Rod Bar |
| Type | MIC,High potential,AZ63C,AZ31 |
| Certification | ISO9001,ISO14001,EJ/T9001-2005 |
| Packaging | In Carton /wood crate/on pallet |
| Product Keywords | magnesium alloy plate az31b az31 az61 |
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier