low prices silvery white1000/1500w microwave waveguide
Definition of waveguide
A hollow, inner, or inner tube that is very smooth. The waveguide is used to transmit a super high frequency electromagnetic wave, which can be transmitted to the destination by means of a minimum loss;
The inner diameter of the waveguide is different from the wavelength of the transmitted signal; the radio communication, radar, navigation and other radio fields are used for the radio communication, radar, navigation, and so on.
At present, there are some common rectangular waveguide, circular waveguide, circular waveguide, Ku wave guide, radar waveguide and waveguide.
Made of metallic materials (copper, aluminum, etc.), rectangular cross section of the rectangular cross section, and the inner air medium is called a rectangular waveguide.
Characteristics of rectangular waveguide
A rectangular waveguide can not transmit TEM wave, and can only transmit TE wave or TM wave.
In general (a>b) the main mode of the rectangular waveguide is TE10 mode
The cutoff wavelength of the rectangular waveguide is 2A
Single mode transmission condition is more than 2B and wavelength is less than a and 2A
The power capacity of the rectangular waveguide is larger and the attenuation is smaller.
product image
Industrial microwave rectangular waveguide BJ26, using the T6061 aluminum national standard profile stretch forming, anodized surface treatment.
Rated withstand power 5.4-7.6GHZ, with power 1000W/1500W
Waveguide mounting dimensions:
The total height of the waveguide is 155mm, the bottom is 138mm, the width is 95mm, the thickness is 8mm, and the long side 2 is 33mm, and the center distance is 66mm,
Short 2 vertical mounting hole center distance 16.5mm,
Hole diameter 7mm , Inner cross section open hole size: length 86mm width: 43mm
Magnetron mounting plate length 131mm, width 75mm, hole spacing (two centredistanceofhole) 17mm, mounting hole diameter 5mm
if you have any problem or you are interest in our company's products, please contact with us