Product Name: plastic sea ball blow moulding making machine price
Machine Feature:
1.Control Unit: Japan Mitsubishi PLC programmable controller and Taiwan HITECH touch panel. English parameter process setting, state monitoring and products counting are convenient and intuitionistic. PLC automatic temperature control model.
2.Hydraulic Unit: It adopts international famous Japan YUKEN brand hydraulic valve and seal, proportional control. And has features of high stationarity and reliability, accurate operation, long longevity, quick response and so on.
3.Extrusion Unit: Hard gear surface decelerator; famous HFinverter inverter adopts Italian technology; Screw speed regulation adopts variable-frequency speed regulation control system. It has the features of stable rotate speed, powerful power, energy-saving and so on. Mixing screw has wide applicability to raw materials and the plasticization quality is even better. Energy-saving machine barrel and A-alloy heaters are adopted for heating
4.Die Head Unit: With single cylinder material-center-in accumulator head, is smooth and dependable. This die head adopts German technology and is made by special imported steel.
5.Clamping Unit: Adopts fixed mould open-closing system,fast and balanced.
6..Blow Fitting Unit: Down blowing fitting is equipped.
7. Lifter Unit: Four turbine reducer liter, lifting balance, quick, stable.
8. Electrical Components: All of the electrical components are made in Japan and Taiwan.
Our Company Information:
Zhangjiagang OSTAR Machine, over 15 years experience on blow molding machine, we supply various machine, capacity from 5ml to 2000L, exported to more than 60 countries, reasonable price, top quality. with fast response after service and technical support all life. we are looking forward to start a good business with all customer worldwide
Machine Specification:
Specification |
Unit |
KSC-5L/II |
Max Product Volume |
L |
5 |
Dry Cycle |
Pcs/h |
700*2 |
Screw Diameter |
mm |
70 |
Machine Size |
L*W*H |
3.4*2.2*2.5 |
Machine Weight |
Tons |
5.5 |
Clamping Force |
Kn |
70 |
Mold Stroke |
mm |
165-525 |
Die Shift Stroke |
mm |
420 |
Template Size(W*H) |
mm |
360*400 |
Max Mold Size(W*H) |
mm |
360*400 |
Screw Diameter |
Mm |
70 |
Screw L/D |
L/D |
25 |
Screw Driver Power |
Kw |
22 |
Screw Heating Power |
Kw |
7.2 |
Screw Heating Zone |
Zone |
3 |
HDPE Output |
Kg/h |
80 |
No of Heating Zone |
Zone |
3 |
Die Heating Power |
Kw |
5.7 |
Max Single Die Diameter |
mm |
145 |
Double Die Center Distance |
mm |
150-180 |
Triple Die Center Distance |
mm |
110 |
Quadruple Die Center Distance |
mm |
80-90 |
Oil Pump Motor |
Kw |
7.5 |
Total Power |
Kw |
42.4 |
Average Power Consumption |
Kw |
20.5 |
Blowing Pressure |
Mpa |
0.6 |
Air Consumption |
M3/min |
0.6 |
Cooling Water Pressure |
Mpa |
0.3 |
Water Consumption |
L/min |
60 |
Company Introduction:
Our company has own mold department, we could make the mold according to customer bottle samples or drawings. we has own CNC machine, drilling, milling machine. and more than 20 experience mold workers, to assembly mold and test mold on our own machine, to make sure machine and mold run prefect, without any defect.
Bottle Molds
Bottle samples for reference:
Machine Loading and shipment
75% of our machines are exported worldwidely, we experience on machine loading into containers, with good protection during long shipment time. to make sure every machine arrive your factory safely.