low price 5 port 10/100/1000Mbps POE 12V power supply network/Ethernet switch
MODEL:YN-PGS1005-A1
DESCRIPTION
YN-PGS1005A1 is a 5-port unmanaged POE (Power-over-Ethernet) Industrial Ethernet switch, it supports 4 POE ports which are classified as power source equipment (PSE). YN-PGS1005A1 uses UTP CAT5e to transmit data and power at the same time from a network node. The port is not only for 10/100/1000MBPS connection,but which POE port can also provide IEEE802.3ats standard of power supply. By testing, YN-PGS1005A1 suits for 802.3af/at terminal equipment supply after classifying,without fear of damaging the private standard POE or non POE equipment. YN-PGS1005A1 greatly reduces the additional power wiring cost of the users, wireless LAN access points, video surveillance camera equipment and so on,providing users with higher flexibility and mobility.
Advanced self-adaptive algorithm only supply PD terminal equipment with power, so without fear of damaging to private standard POE or non POE equipment. It will stop supplying power when POE equipment isn’t connected. YN-PGS1005A1 with terse and reliable design, identify automatically the requirement of POE, speed, duplex ,and using Auto UPlinkTM cable types.
PRODUCT FEATURES
1. 5 port 10/100/1000 MBPS, up to 100 meters POE power supply distance.;
2. Supply power to up to 4terminal equipment simultaneously when using UTP CAT5e;
3. 4 port IEEE802.3at (30 W) Ethernet power supply standard, compatible with IEEE802.3af (15.4 W);
4. Dynamic LED display for monitoring port working conditions and power supply;
5. Through the secondary chip design of lightning protection, avoid electrostatic induction and isolate circuit protection at the same time;
6. Auto MDI/MDIX;
7. Stream control:Full-Duplex takes IEEE 802.3x standard,Half-Duplex takes Back pressure standard;
8. Using store-and-forward switching mechanism;
9. Plug and play, require no configuration, power supply to the adaptive equipment automatically.
PRODUCT SPECIFICATION
POE Specifications | Support IEEE802 .3af,IEEE802 .3at international power supply standard |
POE power supply parameter | Single port: IEEE802 .3af 15.4W, IEEE802 .3at 30W |
Max Power | 60W/96W |
Standard Configured | AC: 48V/1.25A/60W or 48V/2A/96W (Optional) |
Power supply line | Data line to 1 2 3 6 Free line to 4 5 7 8 (alternative) |
Electrical interface parameter | Electrical interface:RJ45 Cable Type :UTP CAT5e Or higher level of New CAT6 Transmission distance :100 meter |
Network protocol and standards | IEEE802.3i 10BASE-T IEEE802.3u 100BASE-TX IEEE802.3x Flow Control IEEE802.3af Power over Ethernet |
Performance Specification | Store and forwarding Backplane bandwidth: 1.0G EC541 series Packet forwarding rate:·1.19Mpps Transfer mode: Full-Duplex or Half-Duplex adaption,self-adaption Addressing: 48 bit MAC address Mac Address Table: 1,000 MAC address per Network delay: 10Mbps to 100Mbps, less than 20ms under 64byte frame |
LED indicators | Per Port: Link, Activity, Speed Per equipment: Power LED , POE indicators LED |
Safety protection | IEC61000-4-2 (ESD) ±15KV(air) ±8KV(contanc) be able to support 8/20us 24A |
Environment and Specification | CE,ROHS |
Dimensions | 117x85x28mm(H x W x D) |
Weigh(kg) | 0.25kg |
Environmental specifications | Operating temperature: 0 to 55℃ Storage temperature: -20 to 70°C Operating humidity: 90% maximum relative humidity, non-condensing Storage humidity: 95% maximum relative humidity, non-condensing |
Warranty | 2 years |
PRODUCT APPLICATION
This product is an embedded integration module, used in conference room system, education system, security system, industrial computer, robot, gateway and so on.