low frequency 48v 96v dc 10000 watt power inverter with battery charger 10KW LCD display
Power for Safety and Comfort
low frequency 48v 96v dc 10000 watt power inverter with battery charger 10KW LCD display
Power Star W7 Pure Sine Wave Inverter with charger 1000w to 12000w Features:
1, Pure Sine Wave output wave form
2, Big Power for high overload ability
3, 3-step intelligent battery charging
4, 8 preset battery type selector for totally flat batteries
5, Less power consumption than convertional units
6, Ability to select power saver mode
7, Optional LCD display and Remote control swtich
8, Pure copper transformers
Power Star W7 Inverter 1000w to 12000w New Features:
1, Charge current control, 25% ~50%~75%~100%
2, Big LCD display
3, LCD remote control switch
4, AC priority / battery priority for solar system
5, Built-in MPPT solar controller for optional
6, New toroidal transformer for the lowest idle current.
Power Star W7 inverter 1000W to 12000W SPECIFICATION:
| Model No. | PSW7-1000 | PSW7-2000 | PSW7-3000 | PSW7-4000 | PSW7-5000 | PSW7-6000 | PSW7-8000 | PSW7-10000 | PSW7-12000 |
| Nominal Power | 1000W | 2000W | 3000W | 4000W | 5000W | 6000W | 8000W | 10000W | 12000W |
| AC Input | |||||||||
| Phase & waveform | Single phase & sinewave | ||||||||
| Voltage | 120VAC/230VAC | ||||||||
| Acceptable Voltage | 194-243VAC\164-243VAC(wide mode) | 154VAC~273VAC | |||||||
| Line Low Transfer | 85V±4%/184(154 wide mode±4%) | 154Vac±4% | |||||||
| Line Low Return | 95V±4%/194(164 wide mode±4%) | 164Vac±4% | |||||||
| Line high Transfer | 135V±4%/253±4% | 273Vac±4% | |||||||
| Line high Return | 127V±4%/243±4% | 263Vac±4% | |||||||
| Frequency | 50Hz or 60Hz (auto sensing) | ||||||||
| Line Low Transfer | 47Hz for 50Hz,57Hz for 60Hz | 40Hz ±0.3 for 50Hz | |||||||
| Line high Transfer | 55Hz for 50Hz,65Hz for 60Hz | 80Hz ±0.3 for 50Hz | |||||||
| Output | |||||||||
| Phase & waveform | Single phase & sinewave(bypass mode sync to input) | ||||||||
| Voltage | 230VAC(bypass mode sync to input) | ||||||||
| Voltage Regulation | ±10%rms(bypass mode sync to input) | ||||||||
| Frequency | 50Hz±0.3Hz(bypass mode sync to input) | ||||||||
| Crest Power | 3 times of ratings | ||||||||
| Short Circuit Protection | Yes,shutdown after 10 s | ||||||||
| Power Factor | 0.9-1.0 | ||||||||
| DC Input | |||||||||
| Battery Voltage | 12V/24V | 12V/24V/48V | 24V/48V | 48V | |||||
| Minimum Start Voltage | 10V for 12V, 20V for 24V, 40V for 48V | 40Vdc | |||||||
| Low Battery Alarm | 10.5V for 12V, 21V for 24V, 42V for 48V | 44Vdc±1.2Vdc | |||||||
| Low Battery Transfer | 10V for 12V, 20V for 24V, 40V for 48V | 40Vdc±1.2Vdc | |||||||
| High Voltage Alarm | 16V for 12V, 32V for 24V, 64V for 48V | 64Vdc±1.2Vdc | |||||||
| Max Charging Current | 70A\35A | 70A | 85A | 100A | |||||
| Over Charge Voltage | 15.7V for 12V, 31.4V for 24V, 62.8V for 48V | 62.8V | |||||||
| Transfer Efficiency | |||||||||
| line Mode | >95% | ||||||||
| Battery Mode | >88% | ||||||||
| power saver | Available when the load is less than 25 Watts | <75W | |||||||
| Indicators | |||||||||
| LED /LCD | Line mode,Charging Mode,inverter mode, Fault | ||||||||
| Protections | low battery,over charging,over temp,over load | ||||||||
| Enviromental | |||||||||
| Operating Environment | 0-40℃,0-90%RH(non-condensing) | ||||||||
| Audible Noise | <60dB | ||||||||
| Physical | |||||||||
| Net Weight(KG) | 18 | 20 | 22 | 35 | 38 | 40 | 60 | 66 | 70 |
| D X W X H(mm) | 218X179X442 | 218X179X598 | 750x520x310 | ||||||
Power Star W7 Inverter Different Angle Show :
Packing details:
| Model | N.W. | G.W. | Packing Size |
| PSW7 1000W | 14kg | 17kg | 59.8*34*32.5cm |
| PSW7 2000W | 19kg | 22kg | 59.8*34*32.5cm |
| PSW7 3000W | 23kg | 26kg | 59.8*34*32.5cm |
| PSW7 4000W | 35kg | 38kg | 77.5*34*32.5cm |
| PSW7 5000W | 44kg | 48kg | 77.5*34*32.5cm |
| PSW7 6000W | 44kg | 48kg | 77.5*34*32.5 cm |
| PSW7 8000W | 56kg | 86kg | 68*54*37 cm |
| PSW7 10000W | 63kg | 94kg | 79*58*39 cm |
| PSW7 12000W | 68kg | 100kg | 79*58*39cm |
Delivery time:
| Sample Lead time: | 5 days | |||||
| Production lead time: | 20days (subject to the actual quantity) | |||||
FAQ
Q 1. What kind of material of transformer?
A. 100% pure copper transformer , NOT Copper-clad aluminun
Q 2. The standard of package?
A. For the small capacity, it use carton, but for big capacity, we should use strong wooden case for protection.
Q 3. Would you accept to use our logo ?
A.If you have good quantity,it absolute no problem to do OEM.
Q 4. Application ?
A.Viehicle,Yacht,Solar power system,Portable Equipments, Power tools,Home and Office appliances.
Q 5. What kind of certificate you have ?
A. Our company already achieve ISO, CE ,ROHS,FCC,PSE SAA .Also have patent for an invention
Q 6. What's the payment term?
A. We accept TT,Paypal ,Western Union ,L/C
Q 7. Delivery time ?
A. In normal it will take about 15 days
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier