Water proof & Anti-corrosion Polyurea Material
Liquid Coating State and waterproof coating,Building Coating Usage elastomeric waterproof coating polyurea
Production Description
The coating system consists of amine-terminated polyether resin, amine chain extender and MDI prepolymer, functional filler is added, and the product belongs to spraying, self-cured and thick coated polyurea. It is used together with ground coat paint and facing coating to form a firm, tough and decorative ground protection system.
Recommended Applications
Tennis court, metal roof, conrete roof, EPS foam roof, swimming pool, basketball court, natatorium, hospitals, kindergartens, electronic super-clean workshops, gyms, underground parking and construction site ground.
Product Characteristic &Physical Properties
Product Characteristic |
||||||
Solid Content |
100% |
Volume Mixing Ratio |
A:B = 1:1 |
|||
Viscosity (25℃) |
≤1000mPa.s |
Shelf Life |
1 year |
|||
Density (25℃) |
A: 1.080-1.160 g/cm3 |
Theoretical Coating Amount (Dry Film: 1mm Thickness) |
1.10kg/m2 |
|||
Curing Characteristics |
||||||
Gelation Time |
30-50 seconds |
Curing Time |
24 hours |
|||
Touch Drying Time |
90-120 seconds |
Maximum Strength |
7 days |
|||
Physical Properties |
||||||
Tensile Strength |
≥14MPa |
Tearing Strength |
≥75KN/m |
|||
Elongation |
≥250% |
Adhesion |
≥8MPa |
|||
Hardness |
≥85A |
Impact Strength |
≥10J |
* Drying time is temperature, humidity, and film thickness dependent.
* Coating equipment status determines the property of coating.
* A test sample is cured in a thermostat of 65-70℃ for 24 hours.
Notes:
1.Polyurea product is intended for industrial use by properly trained professional applicators only.
2.Thoroughly mix container of B component with an air-driven power mixer for a minimum of 15 minutes prior to application.
3.Adding a nitrogen blanket is strongly recommended for use on the “A” component for storage after opening.
4.It is a100% solid production is strictly prohibit add any diluents.
5.The quality and fitness of the product is depending upon the proper mixture and application of the component by the applicator.
6.This specification is an accumulation of long term testing and experience. Published technical data and instructions are subject to change without notice.
Polyurea LC-1108Packaging:
Part A: 220kilogram per drums.
Part B: 210 kilogram per drums. (Custom package available at additional charge)
One set:430 kilogram totally
Storage:
(1).The A component is affected by moisture and must be protected from moisture contamination. Containers are factory sealed with an inert gas to prevent contamination. Keep all containers tightly closed during storage. For further storage after opening, containers must be purged with nitrogen gas or dry air and tightly sealed to protect from moisture contamination.
(2).Store drums and pails in a cold, dry and ventilated location between 15 ℃ and 40 ℃.
(3).Twelve months in sealed unopened containers.
(4).Keep away from fire and heat source.
(5).Keep away from rain and sun.
Shipping:
10 days upon receipt of payment by shipment on Shanghai/ Qingdao Port.
Based on the high requirements for quality over twenty years,we have established long-term mutually beneficial business relationships with all of our customers in the past decades.And we have exported to all over the world.,especially South Korea,Japan,Vietnam,Malaysia,U.S.A.,Canada,Mexico,etc.
Dongying Aonuo International Trade Co., Ltd.(Aonuo International) is the most professional pure polyurea supplier both in China and Asia Pacific. It relies on the R&D Center of Pure Polyurea in China, practical experience in polyurea for more than 20 years and professional in the polyurea both technology and application.
Aonuo International has developed the unique HTSPUA series pure polyurea products to different applications. We has achieved lots of pure polyurea classical projects in China, such as Beijing-Shanghai High Speed Railway,Daqing Oilfield,Wanhua industrial park,Pingding Mountain Luyang power plant,Jining Yangcheng coal mine as so on.It will serve the industry with leading technology and proven quality.
Aonuo International takes a strong belief in pure polyurea definition and struggles against various fake polyureas. We live by quality, integrity, commitment and innovation. These company values are the essence of how we work in every product and service. We will deliver excellence, strive for continuous improvement and respond vigorously to change. Each of us is responsible for the quality of whatever we do to create long-term benefits for customers, employees and communities we serve. We believe in respecting our customers, listening to their requests and understanding their expectation. We strive to exceed their expectation in affordability, quality and on-time delivery.
1.Q: Are you a factory or trading company?
A: We are a factory.
2.Q: Where are you located? What’s your shipping port?
A: We are located in Dongying, Shandong Province, East of China, 2 hours high train from Qingdao.
Usually ship from Shanghai or Qingdao, or depends
3.Q: What is the payment terms?
A: T/T Or L/C at sight .
4.Q: How can I get some samples?
A: Sample is available, but the freight is covered by clients.