led dimmer controller timer tc420 DC12V/24V 5Channel Total Output 20A/LED Time programmable controller
The controller is adopted 8 digital tube to show the modes of time and work. It adopts PWM dimmer electric.It matches the precise clock clip which can control the brightness and darkness of the light according to the time .When present time is same as the predicted time , the light will change as previous brightness. You can set 5 scenes during the 24 hours one day. By optional sensor, the controller can autocatalytically adjust the brightness of the light according to the brightness and darkness of the environment optical line.The controller can be used for the normal one.The controller works through the infrared remote controller, and operate easily.
Technical Parameters:
● Supply voltage:DC12~24V
● Output:3 circuit
● Output current:4A/ch(V-/V-/V-/V+)
● controller size:L122xW71×H25mm
● package size:L135×W80×H55mm
● Net weight:180g
● Gross weight:210g
● Static consumption:<0.24W
● Output power:12V≤144W;24V≤288W
● PWM signal class:256 level
● PWM signal frequency:325HZ
● Remote Control distance:>10M
● Time deviation:<5 seconds per month
1. Time Control
The controller can be built in 5/10/20 scenes(customers' request), that means you can set 5/10/20 time periods, each time period with different brightness. and it can accurate to every minute.
For Example: 08:00-09:30 60% brightness, 09:30-11:11 80% brightness, 11:11-17:00 20% brightness, 17:00-24:00 100% brightness, 24:00-08:00 OFF.
2. Time quick set control
2 keys on the remote, 1 key set for 06:00-18:00 light on, another key set for 06:00-18:00 light OFF.
3. Light Sensor control
Connect the light sensor,and put the sensor in open area. Light on when the sunset, Light OFF when sunrise.
(We built in 5 minutes sensitivity for the sensor, customize can be worked.)
4. Remote Keys Control
10%-100%, brightness+/-, OFF/ON keys to control.
Step 1.
Link the power and lights. Normally, "0--00-00" shows on the digital tube. It's ok If it shows another number, you can change it in the next steps.
Step 2.
press"time set", "00:00" show on the digital tube.
Step 3.
"Time set" key now for hour and minute change, UP & DN for numbers select when the number flash.
when you finish the time set, press "ok" to save.
(The picture means I set the time "12:00", the left"0" means it under remote keys control.)
Step 4.
1. Press "Scene set", 5 numbers on the digital tube, the left one means scene No, midlle two means hour, right two means minute. "UP" & "DN" for number select when it flash, "scene set" key for "Scene No"/Hour/Minute Change.
2. The controller program can be built in 5/10/20 scenes inside, so the Scene No can be 1-5 or 1-10 or 1-20.
3. When you set the time and scene No you want, then select the brightness you need, use "10%-100% keys and "Brightness+/-" to get your brightness. then Press"OK" to save.
4. Do the same steps to save more scenes.
Tips: 1. In this picture, I saved it in Scene 2, the light brightness will be changed on 12:00.
2. When you saved all scenes, remember pree the "Time control" key, the left no is "2" means it is under time control.
Time Control, For Example:
Step 5.
Press the "Sun" key, the left number is "1", link our light sensor accessory with the controller.
Now: Light ON when sunset, Light OFF when Sunrise.
Tips: 5 minutes sensitivity, can be changed in the program.
Step 6.
Press the second left key at bottom. the left No shows "3".
Now: The light ON " 6:00am-18:00".
Step 7.
Press the first left key at bottom. the left No shows "4".
Now: The light ON " 18:00-06:00".
Tips:
1. press "ESC" key when you don't want to save the data.
2. The left mumbers on the digital tube: "0" means control by the remote keys. "1" means control by light sensor, "2" means control by time, "3" means light on 06:00~18:00, "4" means light on 18:00-06:00.
Q1: Are you a factory or trade company?
A :We are a factory, we have a long-term relationship with domestic led lights factories & international wholesalers.
Q2: What's your main products?
A: Our main products cover LED dimmer, LED Amplifier, DMX Decoder, led strips, led night light.
Q3: What's your core value?
A: We have a professional R&D team, Provide our customers the best solution is our mission.
Q4: Can you custom-made products?
A: Yes, we can customized it with your brand.
Q5: What about the lead time?
A: Sample needs 3-5 days.
Q3: Do you have any MOQ limit for led dimmer order?
A: 100pcs MOQ. 1pcs for sample check is available.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier