For example, 200W you could set current from 1000-1800ma for different project, dont need to have several different driver.
2. High Voltage version available. Output Voltage coule be 100-180v or 200-280v.
3.Surge test pass 6kv. more satetry.
Model | Output Power | Input Voltage | Output Current | Output Voltage |
GA-NDFX050AF-CC420/TPO | 50W | AC100-277V | 230-420mA | DC 100-180V |
GA-NDFX100AF-CC850/TPO | 100W | 450-850mA | DC 100-180V | |
GA-NDFX100AF-CC420/TPO | 300-420mA | DC 200-280V | ||
GA-NDFX150AF-CC1350/TPO | 150W | 750-1350mA | DC 100-180V | |
GA-NDFX150AF-CC650/TPO | 500-650mA | DC 200-280V | ||
GA-NDFX200AF-CC1800/TPO | 200W | 100-1800mA | DC 100-180V | |
GA-NDFX200AF-CC850/TPO | 650-850mA | DC 200-280V | ||
GA-NDFX240AF-CC1050/TPO | 240W | 780-1050mA | DC 200-280V |
Item | |||||||
Voltage Range | AC 100-277V | ||||||
Limited Voltage | 277V AC | ||||||
Power Factor | >0.97 | ||||||
T.H.D | <10% | ||||||
Efficiency | 93% | ||||||
Output | Current Accuracy | ±3% | |||||
Power-on Time | <500ms | ||||||
Protection | Short Circuit | constant voltage mode, recover automatically after fault condition is removed | |||||
Over Loading | ≤120% constant voltage limiting, recover automatically after fault condition is removed | ||||||
Over Temperature | 100℃±10℃ Shut down o/p voltage, recovers automatically after temperature goes down | ||||||
Others | Ta | 50℃ | |||||
Tc | -40~85℃ | ||||||
IP rating | IP67 | ||||||
Life span | 50000hours | ||||||
Warranty | 5years | ||||||
Notes | 1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃of ambient temperature. 2. Tolerance: includes set up tolerance, line regulation and load regulation . 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again. |