*The headstock gears are quenched and grinded to ensure gear strength to reduce noise.
Model | Units | LH1440K | LH1460K | LH1440KA | LH1460KA | ||||
Max .Swing over bed | mm | 360 | |||||||
CAPACITY | Max .Swing over cross slide | mm | 210 | ||||||
Max .Swing over gap | mm | 508 | |||||||
Effective gap length | mm | 180 | |||||||
Center distance | mm | 1000 | 1500 | 1000 | 1500 | ||||
Bed width | mm | 260 | |||||||
Spindle hole | mm | 40 | 52 | ||||||
HEADSTOCK | Spindle nose | ISO-D4 | ISO-D6 | ||||||
Spindle taper | MT5 | MT6 | |||||||
Spindle speed(Number) | rpm | (12steps)40-1800 | |||||||
Longitudinal metric feeds | mm/rev | 37kinds 0.043-0.653 | |||||||
FEEDS | Cross metric feeds | mm/rev | 37kinds 0.024-0.359 | ||||||
Metric threads range | mm | 37kinds 0.4-7 | |||||||
Inch threads range | T.P.I | 28kinds 4-56 | |||||||
Dia. Of main screw | mm | 22 | |||||||
Pitch of main screw | T.P.I | 4mm or 8 | |||||||
Max.travel of top slide | mm | 95 | |||||||
CARRIAGE | Max.travel of cross slide | mm | 180 | ||||||
Max.size of toolshank | m2 | 16*16 | |||||||
Dia. Of tailstock sleeve | mm | 45 | |||||||
TAILSTOCK | Taper Of tailstock sleeve | MT3 | |||||||
Max.travel of tailstock | mm | 120 | |||||||
Main power | KW | 2.2 | 3 | ||||||
MOTOR | Coolant pump motor | W | 90 | ||||||
PACKING | L*W*H | mm | 2000*750*1650 | ||||||
2500*750*1650 | |||||||||
WEIGHT | (N.W/G.W) | Kg | 1050/1300 | 1300/1600 | 1100/1350 | 1350/1650 | |||