jinjiang jiaxing group co ltd/ manuli service on site yiwu / qc inspection Shenzhen

• • Mainly includes: 
  • Quantity check, Workmanship check, Product performance (testings), Measurement and Client's special requirements.
  • Pre-Shipment Inspection refers to an inspection carried out when all the goods are produced and packed completely. By conducting a sampling check in accordance with the AQL standard, to have an overall assessment of the quality of the goods.

• Mainly includes:
• Check quantity of loaded products, container status (cleanliness, moisture, rust, holes, etc.); and monitor the loading process to ensure no damaged products and outer cartons are loaded into the container. Also to remind factory to reinforce products when container is not fully loaded.

• Mainly includes: 
• 1.Supplier legitimacy: (Business license; house proprietary certificate; export license; bank basic account and collecting account and so on.

2.Production capacity: (Factory area,Production equipment, staff and storage area, etc.)

1. 3.Quality control: 
2. (Quality control procedure documents and the quality department fulfillment degree.)

Master carton quantity check

Product per inner carton quantity check

Workmanship is a very important section in the whole process of inspection. It will cause in FAIL if the number of defects were too much.

Generally, the inspection standard is according to AQL standard, the form of ANSI/ASQZ1.4 (MIL-STD-105E). For sample size and the defects acceptance, level II and 0 for Critical, 2.5 for major and 4.0 for minor will be adopted, if there is no special requirements from clients.

Testing is the most important part of inspection.

The main purpose is to check the basic function of product,  the safety, durability, and all other performances. 

The test items varies according to the products kinds. 

Below are some common testing items for your reference:

Generally, measurement check includes package size & weight check and product size & weight check.

The check quantity is 1pc per item with the tolerance of 10% for package and 5% for product, if the actual results were different from the spec or requirements.