(1) Slicing: Only the slicing knife is installed.The thickness can be controlled by adjusting the handle.
(2) Cutting: The slicing knife and the cutting knife are installed simultaneously.The width of the thread is adjusted by changing
the cutter.
(3) Dicing: Cut the silk and put it into the feeding tube to cut it again.
Note: this machine high efficiency, according to the different raw materials, the processing process will produce a little slag,belongs to the normal situation!
Before processing, the raw materials need to be cut into suitable processing blocks.
After the use of the machine, please clean the barrel and the tool in time, so as to avoid debris blocking the tool to affect the next use.Wipe the drum with a damp cloth, then put it in a dry and ventilated place for later use.