VM-5GA |
VM-5S |
VM-61 |
VM-5GB |
VM-64 |
VM-68 |
impinj r2000 chip uhf rfid reader modules for arduino
Introduction:
The module is small, low power consumption; its size is only half-card size, the preferred choice of embedded RFID reader
Features:
1. The high-performance RF discrete components and 32-bit ARM processor design framework
2. Reading distance can reach 1.5 meters above, is best choice to apply RFID reader integration and development
Detailed Product Description:
1, Comply with EPC G2 protocol
2, Used to integrated into all kinds of handheld terminal
3, More than 1 meter reading/writing performance
4, with SDK for second development
Overview:
This UHF RFID Reader chip is extensively applied to the integration of all kinds of handheld reader. It can be compitable with existing handheld terminal device. it is best choice for data collection.
Specification |
|
Model No. |
VM-5GA |
|
|
Electrical parameters |
|
Working Voltage |
DC 3.5V – 5 V |
PCB size |
Pcb size:50*50mm , Ceramic antenna size:40*40mm Overall height :8.5mm |
Standby current |
<80mA (EN pin high level) |
Sleeping current |
<100uA (EN pin low level) |
Operation current |
180mA @ 3.5V (26 dBm Output,25°C). 110mA @ 3.5V (18 dBm Output,25°C). |
Operating time |
<100mS. |
Operation temp. |
- 20 °C - + 70 °C |
Storage temp. |
- 20 °C - + 85 °C |
Working humidity |
< 95% ( + 25 °C) |
Protocol |
EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C |
Frequency |
840-960MHZ |
Working area support |
US, Canada and other regions following U.S. FCC Europe and other regions following ETSI EN 302 208 Mainland China;Japan;Korea;Malaysia;Taiwan |
Output power |
18-26 dBm |
Read/write range |
Read: 200-250cm;write: 10-50cm(adjusted) |
Output power accuracy |
+/- 1dB |
Output power flatness |
+/- 0.2dB |
Receive sensitivity |
< -70dBm |
Store tag peak speed |
> 50pcs/sec |
Tags storage capacity |
200pcs tags @ 96 bit EPC |
Tags RSSI |
support |
Communication interface |
TTL Uart interface |
Communication baud rate |
115200 bps(default and recommend) 38400bps |
Heat-dissipating method |
Air cooling(no need for out install cooling fin) |
1. You are factory or trading company?
We are original equipment manufacturer in RFID UHF reader for over 10 years.
2. How is your QC?
We have strict QC process and all the products will be 100% testing before shipping.
3. What is your payment term?
100% payment should be paid before shipping.
4. What is your payment way?
T/T, Western Union, Paypal
5. What is your warranty?
within 1 year for the reader
6. Can I get technical support from you?
Sure. Our sales are of all good knowledge in the field. Besides, we have a technical team behind to support.