No. | Technical features of H2 generator by water electrolysis |
1 | Modular and pressurized electrolyser with Bipolar Technology, long life time without maintenance |
2 | Valves on main processing lines to be imported from Modentic, China |
3 | Non-Asbestos membrane used in the electrolyzer, satisfying the environment protection requirements. |
4 | Regulating diaphragm valves to be imported from Jordan, USA |
5 | Analysers (Online) from Panametric, USA |
6 | 316L SS material for process pressure vessel; |
7 | Siemens PLC configuration for the control system; |
8 | Special process design for hydrogen purification unit, so there is no loss of gas when the dryer is in regeneration state. |
9 | the hydrogen generator are very compact with high reliability, all piping and cabling works within the skid are completed before ex-works, saving the on-site erection engineering time. |
Description | Unit | Specifications | ||||
Cabinet-type hydrogen generation system by water electrolysis: model CDQ-2/1.5 the specification for one stream is shown as the following: | ||||||
Flow rate (as pure H2) | Nm3/h | Min. | 10 | |||
Nom. | 20 | |||||
Pressure at Generator | MPa | Maximum | 1.5 | |||
Temperature | °C | Nominal | ambient temp. | |||
H2 Purity | Vol % | Minimum | 99.99 | |||
Impurities | ||||||
Trace O2 content | Vol % | Maximum | 0.01 | |||
H2O | g/Nm3 | Less than | 4 |
Q: Are you trading company or manufacturer? | ||||||||
A: PERIC is hydrogen generator equipment manufacturer with more than fifty experiences | ||||||||
Q: How long is Juneng's lead time? | ||||||||
A: It depends on your purchasing quantity, it's 3~4 months after payment generally. | ||||||||
Q: What kind of service can Juneng provide? | ||||||||
A: PERIC can provide on-site technical support, user guide and online FAQ. | ||||||||
Q: What is warranty of your hydorgen equipment | ||||||||
A: 12 months after the date of performance acceptance by the customer, in case the Hydrogen generator operating in normal condition |