1.According to the content of impurities and thickness, ass proper activated bleaching earth, general usage 2% for oil heavy.
2.Gasoline and diesel generally don't need to heat, but sticky oil need to be heated, such as vaseline, engine oil, open fire and
steam is available. Generally heating to 105℃-110℃, reaction kettle in iron and add white earth in advanca, can prevent oxidation
of oil or composite.
TEST METHOD:
1) take 100g oil in the beaker.
2) put the beaker on heating equipment,heat the oil sample up to 120°C
3) measured 3-5g activated bleaching earth sample by electronic scale
4) put clay sample into oil,adding slowly by glass rod and stiring, agitate the solution magnetically and manually for 30 minutes
while the temperature being kept at 105 to 110°C
5) stick filter paper on funnel wall,then pour oil into funel,waiting for the result.as pic shows.
NOTE:
The activated clay began to lose gesso when temperature above 300℃,make the structure change of decolorization have influence.The
surface is very easy absorption of moisture,the water is high also influence decoloring effect ,and the catalytic performance.Pay
attention to prevent rain,moist,should be stored in ventilated dry place.