suppository moulds

Using suppository molds is another way of delivering medication into someone's body, and they can be purchased on Tradechina.com at attractive prices. The molds come in a variety of cavity sizes and with a variety of cavities per mold. Common sizes vary from 1 g to 2.5 g, and a common number of cavities ranges from 6 cavities up to 100 cavities. The two halves of the mold are held together with either nuts or a centered screw. There are also suppository molds made from flexible rubber. When the suppository mixture has congealed in these molds, the finished suppositories are "pushed" out of each cavity.

Plastic suppository shells come in long strips that can be torn into any number of cavities. The suppository mixture is poured directly into the shell up to a mark. These disposable suppository molds do not need any lubrication, regardless of the suppository mixture. When the mixture has hardened, the plastic mold is heat-sealed.

When a patient is ready to use a silicone suppository mold, they select one shell and peel the sides of the shell off to obtain the suppository. One advantage of this type of mold is that it will not run out of the mold if the suppository should melt. If the material congeals again, it will retain the suppository shape. This type of silicone suppository mold is available in 1 g to 5 g sizes and many different colors.

Buy suppository molds on Tradechina.com at attractive prices and choose from a wide range of options to make sure the medicine goes in comfortably and smoothly.