Laurel supply several grades of mullite insulating brick for use in applications from 1260°C to 1760°C.Each grade of brick is formulated to meet specific thermal and physical requirements.After firing each brick is machined to close dimensional tolerances.Insulating bricks are manufactured utilising exceptionally high purity clays and other ceramic materials.The carefully graded organics which are used during the manufacturing process burn out during firing to give a uniform pore structure.
Features:
1. High insulating properties
2. Strong compressive strength
3. Low heat storage
4. High purity
5. Tight dimensional tolerance
6. Energy saving
7. Low impurities
JM serises
Item | JM23 | JM26 | JM28 | JM30 |
AL2O3(%) | 38-44 | 50-58 | 65-70 | 70-73 |
Fe2O3(%) | 1.0 | 0.9 | 0.8 | 0.7 |
Classification Temperature (°C) | 1350 | 1430 | 1540 | 1600 |
Bulk Density (g/cm3) | 0.8-1 | 0.8-1 | 0.8-1 | 0.8-1 |
Reheating Linear Change (%) CT-30 °CX 8H | 1250°C -0.5 | 1400°C -0.5 | 1500°C -0.5 | 1550°C -0.5 |
Cold Crushing Strength (Mpa) | 2.0-3.5 | 2.0-3.5 | 2.0-3.5 | 2.0-3.5 |
Modulus of Rupture (Mpa) | 1.5 | 1.7 | 1.8 | 2.0 |
Thermal conductivity400°C(W/m.k) | 0.25 | 0.27 | 0.32 | 0.41 |
Thermal Expansion1000°C(%) | 0.5 | 0.7 | 0.8 | 0.9 |
B C serises:
Item | B-1 | C-1 | C-2 |
AL2O3(%) | 25-30 | 35-40 | 45-50 |
Fe2O3(%) | 2 | 1 | 1 |
Classification Temperature (°C) | 1000 | 1300 | 1400 |
Bulk Density (g/cm3) | 0.8-1 | 0.8-1 | 0.8-1 |
Cold Crushing Strength (Mpa) | 2-2.5 | 2.5-3.5 | 3.0-4.5 |
Thermal conductivity400°C(W/m.k) | 0.17 | 0.23 | 0.25 |
♦ Primary hot face linings
♦ Back-up insulation for furnaces and kilns
♦ Flue insulation
♦ Sulphur recovery equipment
♦ Hot blast stoves
Q: Are you a manufacturer or trader?
A: Factory + trade (mainly factories, at the same time, we operates other related products)
Q: Can we visit your factory?
A: Sure,welcome at any time,seeing is believing
Q: what's the MOQ of trial order ?
A: No limit,We can offer the best suggestions and solutions according to your condition.
Q: Which payment terms are you accept?
A: T/T,LC,Western Union,moneygram,Paypal are available for us.
Q: After an order is placed, when to deliver?
A: 15-25days
Q: Is your company accept customization?
A: We have own factory and excellent technical team, and we accept OEM service.
Q: How about your company's certification?
A: SGS,ISO9001 and Test Report,also we could apply other necessary certification.
Q: how to solve the quality problems?
A: If the products are not conform to customer samples or have quality problems, our company will be responsible to make compensation for it.