hockey flooring tile super glide synthetic ice skating rink

Synthetic ice can be used instead of a real ice surface for your backyard ice rink or for even the largest commercial indoor ice rink.

Or, install a synthetic practice rink in your basement for use in the summer while your backyard ice rink is nothing but a puddle and a memory. Don't worry - you can use your regular ice skates that have metal blades on the synthetic surface.

Synthetically made ice is usually very lightweight, has low friction and is made of strong, wear-resistant plastic or polymer that is used for skating with regular ice skates that have metal blades.

A tremendous amount of research has been done - there are definitely some synthetic surfaces for ice rinks that are better than other synthetic surfaces!

What is Synthetic Ice?

Synthetic ice is a high-tech plastic polymer on which you can skate. It resembles a white plastic cutting board in texture. But, these are giant panels, usually 4 feet by 8 feet that resemble huge jigsaw puzzles. The dovetail or tongue-in-groove joints anchor the panels together snugly, ensuring a smooth and seamless skating experience.

These specially engineered polymers permit a skate blade to glide almost as smoothly as if on real ice.

The panels are usually made from very high molecular weight polyethylene (VHMWPE), or better, ultra-high molecular weight polyethylene (UHMWPE). These surfaces are typically 'dryer' than the high-tech plastic polymers with oils embedded. In almost all cases, the regular (if occasional) sprayed application of a glide enhancer is required.

The very best (and most expensive, of course) synthetic panels are fabricated from ultra-high density (UHMW) polyethylene polymers with lubricating oils embedded directly in the polymer.
When you skate on ice, you're gliding on a thin film of water created by the heat of the blade's friction, which melts the ice. On these top-of-the-line oil-embedded polymers, the skating friction releases built-in lubrication, so the blade glides smoothly from start to finish without the need for any glide enhancers.
Most polymer panels are at least 1/2 inch thick. Some companies manufacture a 3/8 inch thick panel, and the most heavy-duty commercial panels are 3/4 inches thick. If desired, you can special-order 1" panels from a few firms.
The polymer is not damaged by high or low temperatures and is UV protected.
Solid polymer panels are waterproof. If outside, you can skate on a wet surface. In fact, it might be even better when wet, depending on the panel system you purchase.
Gliding improves with wear. Glide enhancer is always needed except for the truly oil imbedded polymers.

The ice rink barriers' material is HDPE and UHMW-PE, it includes panel, steel frame, steel triangular support, handrail and screw. Special design adding Aluminium alloyand bright color guarantee the quality of the product that is safety,beautidul, sturdy and durable.

Maintenance:
No compressors or complex machinery
No compressors or complex machinery
No cold generation (no chillers, no generators)
Low maintenance energy cost
Low water consumption
Low maintenance costs

Applications:
Indoor and outdoor skating
Soccor wall
playground barrier
Mall entertainment equipment etc.

Standard size:
Board: 2000x1200x10mm
Triangle Support: 50x25x2mm
Bracket Support: 50x50x2mm
Other customized sizes are also availble.

Is it harder to skate on Synthetic Ice?
All synthetic ice surfaces require more effort to perform maneuvers due to the added friction of skating on a polymer surface. This is one of the reason's why synthetic ice is used throughout the industry as a training tool for skaters of all ages. Once skaters are introduced to synthetic ice they often adjust quickly to the surface and make a smooth transition in just a short time.

Can I perform a "Hockey Stop" on PolyGlide Synthetic ice?
Yes. All the same maneuvers that can be executed on "natural" refrigerated ice such as stops, starts, crossovers, backwards crossovers, toe kicks and jumps can all be performed on PolyGlide Synthetic Ice.

How long does PolyGlide Synthetic Ice last or will it wear out?
One of the great things about PolyGlide Synthetic Ice is the more often you use it the more the surfaced is "enhanced" by skating. Normal wear from skating reduces friction and skate blade contact with the surface. PolyGlide is built to last many years under normal use.

Can both sides be used to skate on?
Yes, both sides of PolyGlide can be used for skating and can be easily flipped-over and re-installed if needed. PolyGlide is a solid core panel that has a special "Beaded" surface on both sides that can be used for skating.

What type of maintenance is required to maintain a synthetic ice surface?
Obviously an indoor surface that is not exposed to the outside elements will require very little maintenance. For a non-infused surface just spray-on and even mist of PolyGlide glide enhancer and you're ready to go. Infused or "Self-lubricating" surfaces require no surface spray or wax for skating but does require regular cleaning to keep the surface free of imbedded dirt or soil. Depending on the amount of usage your rink is getting will determine on how often you will need to clean or enhance your surface. If your rink is exposed to excess dirt or dust your skate glide will become compromised.

How often do I need to apply a glide enhancer?
The amount of glide enhancer applications is strictly a matter of preference depending on how you want your synthetic ice surface to perform. Indoor rinks not exposed to rain will require less glide enhancer applications than an outdoor rink. Our infused, self-lubricating panel does not require any enhancer or surface lubricants.

Is it necessary to use a glide enhancer with PolyGlide Synthetic Ice?
Currently we offer both Infused (self-lubricating) and non-infused surfaces for skating. Non-infused rinks do require enhancer but tend to stay cleaner when properly maintained. Infused surfaces do not require enhancer but must be kept clean to maintain performance.

Does PolyGlide Synthetic Ice come with a warranty?
PolyGlide comes with a lifetime warranty against any manufacturing defects that leads to damage to the panels (excluding normal wear).

What separates PolyGlide Synthetic Ice from some other synthetic ice surfaces on the market?
Home Ice Supplies prides itself in offering it's customers a synthetic ice product that provides both quality & affordability! With this we offer our customers the following!:

1). We will beat any price based on size, quality and performance.

2). We will match or better any warranty offer from our competitors.

3). We offer our customers a lifetime LOCKED-IN PRICE GUARANTEE on any additional panel purchases!

4). PolyGlide is Designed, Manufactured and MADE IN THE USA!!!

Home Ice Supplies has become a leader in synthetic ice technologies with the develpment of PolyGlide Ice. PolyGlide Ice is designed for both commercial and residential installations offering quality and affordability for all clients and customers. Some panel options include the following:

• Grip-Lock Dovetail Edging
• Flush Perimeter Edging
• Radius Corners
• Lines & Face-Off Circles
• Goalie Creases
• Infused "Self-lubricating" panels
• Portable Home Ice Panel

It comes with:

Synthetic ice rink with barriers, installed and dismantled
Full training of your own staff prior to handover
We provide regular on-site visits and full support
Log cabin skate hut, Lights, music etc
Sufficient skates in a range of sizes (approx 150)
On-site ice skate maintenance equipment (skate grinder etc)
ice Skate distribution point (log cabin)
Seating for skate change area
Protective floor coverings
Rubber matting
Cleaning machine
Snow machines
Glide spray unit and consumables
First aid kit