Welcome to TradeChina
high volume high pressure horizontal double suction centrifugal water pump with motor or diesel engine
FOB Reference Price
Purchase quantity ()
Minimum order quantity
Payment
Meorient Import & Export Co.LTD
China - Hangzhou
Trading Company
Trade Capacity
Export Percentage
Nearest Port
Hangzhou,Shanghai
Accepted Delivery Terms
Employees
5-10人
Accepted Payment Currency
USD,CNY
Average Lead Time
45 Day(s)
Certifications
Product Specifications
--Product Description
Specification | |||
Inlet Diameter | 6-48inch | ||
Capacity Q | 112-12500m3/h | ||
Head H | 8.6-140m | ||
Power P | 22-2240KW | ||
Motor | Brand optional,100% Copper Wire | ||
Voltage | 380V/415V/660V/1140V | ||
Material | Cast Iron/SS316/SS304/Copper,Can be customized | ||
Scope of supply | Pump,Motor,Coupling,Base,Pipe,Control cabinet,Flange,Wearing parts,Other Accessories | ||
Certification | ISO 9001 | ||
Warranty | One Year/According to customer requirements | ||
The SH type is a single stage double suction split case centrifugal pump, suitable for conveying clean water and non-corrosive (or weakly corrosive) liquids.The maximum temperature of the medium is 80 degrees. After the bearing bodies at both ends pass through the cooling water,hot water of not more than 130 degrees can be delivered. According to the customers’ special requirements,the material can be changed to meet other conditions of use.
Single stage irrigation double suction split case centrifugal water pump.Mainly used in water supply plants, air conditioning circulating water,heating network systems, building water supply, irrigation, drainage pumping stations, power plants, industrial water supply systems, fire protection systems, shipbuilding industry, mine water supply and drainage, etc.
The pumps mean that:For example 10SH-13A
10-------Pump’suction diameter is divides by 25(i.e.the suction diameter is 250mm)
SH--------Single stage double suction centrifugal pump
13 ------The specific speed is divides by 10(i.e.this pump specific speed is 130)
A --------Pump impeller is cutted for the first time
10-------Pump’suction diameter is divides by 25(i.e.the suction diameter is 250mm)
SH--------Single stage double suction centrifugal pump
13 ------The specific speed is divides by 10(i.e.this pump specific speed is 130)
A --------Pump impeller is cutted for the first time
Single stage irrigation double suction split case centrifugal water pump.The main components of the pump are pump body, pump cover, impeller, shaft, double suction seal ring, shaft sleeve and bearing body.
1) The pump body and the pump cover are made of cast iron, which together form the working chamber of the impeller. There are pipe screw holes for the pressure gauge and vacuum gauge on the inlet and outlet flanges of the pump body. At the lowest point of the pipe diameter, there is a pipe screw hole for discharging water.
2) Double-side inflow impeller,its shape is symmetrical, and it is tested by static balance at the factory.
3) Bearing: The structure of this series of pumps adopts rolling bearing (caliber 150mm-500mm) and is lubricated with butter.
4) Shaft seal: The shaft seal of the pump is composed of packing chamber, packing ring, packing gland, packing sleeve, packing and shaft sleeve.
5) Pump with caliber ≥350, water filter is mounted at the end of the suction pipe.Before start up the pump,use a vacuum pump to draw the water. Therefore, two sets of exhaust pipes are installed in the upper part of the pump cover, and a small check valve is connected in series in the pipe. A small check valve is used to prevent high pressure water from flowing back into the low pressure zone during normal pump operation.
1) The pump body and the pump cover are made of cast iron, which together form the working chamber of the impeller. There are pipe screw holes for the pressure gauge and vacuum gauge on the inlet and outlet flanges of the pump body. At the lowest point of the pipe diameter, there is a pipe screw hole for discharging water.
2) Double-side inflow impeller,its shape is symmetrical, and it is tested by static balance at the factory.
3) Bearing: The structure of this series of pumps adopts rolling bearing (caliber 150mm-500mm) and is lubricated with butter.
4) Shaft seal: The shaft seal of the pump is composed of packing chamber, packing ring, packing gland, packing sleeve, packing and shaft sleeve.
5) Pump with caliber ≥350, water filter is mounted at the end of the suction pipe.Before start up the pump,use a vacuum pump to draw the water. Therefore, two sets of exhaust pipes are installed in the upper part of the pump cover, and a small check valve is connected in series in the pipe. A small check valve is used to prevent high pressure water from flowing back into the low pressure zone during normal pump operation.
Model | Inlet/Outlet(inch) | Capacity(m3/h) | Head(m) | Power(KW) | Speed(rpm) |
6SH | 6 | 112-220 | 35-84 | 30-55 | 2900 |
8SH | 8 | 160-351 | 31-100 | 37-110 | 2900 |
10SH | 10 | 320-612 | 8.6-71 | 22-132 | 1450 |
12SH | 12 | 504-972 | 10-98 | 30-300 | 1450 |
14SH | 14 | 745-1663 | 10-140 | 55-680 | 1450/1470 |
16SH | 16 | 800-1620 | 30-97 | 110-630 | 980/1480 |
20SH | 20 | 1150-2450 | 10-108 | 110-800 | 970 |
24SH | 24 | 2340-3960 | 13-80 | 185-900 | 960/970 |
32SH | 32 | 4680-9900 | 25.4-73.5 | 560-2240 | 590/730/742 |
48SH | 48 | 8500-12500 | 14.3-28.5 | 800-1250 | 800/1250 |
No desirable products?
Sourcing assistant>
How to start your business
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier