| Product Name |
UY2000 Battery Charger |
| Brand Name |
YEWY |
Model Number |
UY2000
|
| Input Voltage |
90-130Vac/200-260Vac/100-240Vac |
Frequency |
47~63HZ |
| N.W |
5.5KG |
Dimension |
340*150*90mm |
| Efficiency |
88% |
Leakage Current |
<0.75mA |
| Operating humidity |
5%-95% RH Non-condensing |
Altitude |
2000m |
| Operating Temperature |
-15℃—+60℃ |
Storage Temperature |
-40℃-+80℃ |
| Safety certifications |
CE, CB, RoHS Directive-compliant |
| Suitable battery Type |
Lead Acid/LiFePo4/Li-ion |
| Charging Time |
Cut-off point for Li battery is 8% of CC and it can be set between 3-10%.(charging time:3-4 hours) |
| Transition for Lead acid charger is 25% of CC.(charging time:6-8 hours) |
| Protection |
Over Current, Over Voltage, Over temperature, Short Circuit, Reverse Polarity, shut off or trickle and anti-reverse charge |
| Advantage |
*MCU and intelligent PWM IC control ,full automatic transition of CC,CV and Float/Cut-off, meet the demands for different Curve. |
| *Aluminum case, Robust, Elegant and Reliable |
| Package Contents |
*1xbattery charger
*1xInput Wire
*1xUser Manual
This battery charger is your affordable necessity without sacrificing performance.
It features an integrated MCU and PWM for power control.
|
Output Over Voltage Protection
When the charger output voltage exceeds the maximum charging voltage, the charger enters the standby state protection. It will restore to normal working condition automatically after troubleshooting.
Output Over Current Protection
When the charger output current exceeds the maximum charging current, the charger enters the over current protection status. It will restore to normal working condition automatically after troubleshooting.
Short Circuit Protection
When the charger has short circuit at output, the charger enters short-circuit protection status. It will restore to normal working condition automatically after troubleshooting.
Reverse Polarity Protection
When the charger output positive negative pole and battery pack are connected in reverse, the internal relay of the charger is not sucked and there is no voltage current at the output terminal of the charger. After the correct connection, the charger can be charged normally.
Over-Temperature protection
When charger internal temperature exceed 75℃, it will be Into the over-temperature protection state and the cuts off output and the cooling fan is still working. When the temperature returns to 65℃, the charge is restored again
|
