1.Battery charger for Car, bus, truck, boat,etc
2.Fully CPU controlled 7-stage automatic battery charger
3.With CE, CB certified
Connection:
1. Cut off the supplied battery clips; ensure you leave sufficient cable to reach the battery terminals.
(DO NOT extend the battery charger DC cables, as the added voltage drop will cause incorrect charging)
2. Fit a ring terminal to the BLACK Negative (-) wire.
3. Connect the inline fuse to the RED Positive (+) wire.
4.Connect a ring terminal to the other end of the inline fuse.
5.Connect the RED lead (with inline fused and ring terminal) to the Positive (+) battery post.
6. Connect the BLACK lead (with ring terminal) to the negative (-) battery post.
7. Fit the correctly rated fuse.
Specifications:
P/ No. | MBC 1210 |
Type | 7-Stage Automatic |
Input Voltage | 220-240V~, Hz 110V~, 600Hz |
Input Power | 307W |
Output Voltage/ Current | 12V DC, 10,000mA |
Minimum Start Voltage | 2V |
Current Fuse Rating | 250V AC, T 3.15A |
CHARGE CONRTOL | |
Desulption | Pulse charge to 11V |
Soft start | Half the rated set current up to 12V |
Bulk | 10,000mA (up to 14.4V) |
Absorption | Constant voltage until current drops to 1.5A |
Bettery test | Monitors voltage for 90 seconds |
Recondition | Constant current (1.5A) up to 16V for 14 hours. |
Float | 13.8V also with pulse feature. |
Efficiency | App. 85% |
Short Protect | Short Circuit Protection |
Polarity Reverse | Polarity Reverse Circuit Protection |
Non battery link protection | Circuit protection |
Link battery type mistake | Circuit protection |
Over voltage protection | 17.5 V |
Thermal Protect | 65℃ +/- 5℃ |
Cooling fan | Automatic temperature controlled |
BATTERY RANGE | |
Deep cycle | 70-200Ah |
Types of batteries | Most type of lead acid batteries including Calcium, GEL and AGM. |
Dimension (L x W x H) | 190 x 115 x 62 mm |
Weight | 1.1kg |
No matter Size or type, leave it to MBC- charge.
Power of Professionals!
Package & Delivery:
1. Exported standard colorful carton packing, or according to your request.
2. 35-45 working days upon receive the deposit
About us
Ligao (Zhongshan) electrical appliance Co., LTD is one of the most specialized manufacturers of electrical appliance with over 20 years of experience.
Conducted by ISO9001:2000 and gain RoHS, CB, CE, and E-mark approvals.
Company Information:
Investment on Manufacturing Equipments: US$5 Million - US$10 Million
Factory size: 40,000 Square Meters
Production line Workers: 400 people
R&D engineer: 5-10 people
QC Staffs: 5-10 people
Sales Team: 10 people
-Why PACO 7-stage battery charger?
1). This is a fully automatic battery charger with 7 charge stages.
2). Automatic charging protects your battery from being overcharged. You can leave the charger connected to the battery charger indefinitely.
3).Compare with traditional chargers, 7-stage charger with much more comprehensive and accurate charging process, ensure your battery longer life and better performance!
4). 7-stage chargers are suitable for most battery types including calcium, Gel and AGM batteries. They could also help restore the drained and sulphated batteries.
-How do I know if the battery is charged?
The charger’s FULLY CHARGED LED will illuminate (solid). Alternatively use a Battery
Hydrometer A reading of 1.250 or more in each cell indicates a fully charged battery.
-I have connected the charger properly but the ‘CHARGING LED’ does not come on?
In some cases batteries can be flattened to the point where they have very little or no
voltage. This can occur if a small amount of power is used for a long time, for example
a map reading light is left on for a week or more. 7-Stage chargers are
designed to charge from as little as 12V charger 2.0 Volts and 24V charger 4.0 Volts
If the voltage is lower than 2.0 Volts and 4.0 Volts use a pair of booster cables to connect between
two batteries to provide more than 2.0 Volts and 4.0 Volts to the battery being charged. The charger
can then start to charge the battery and the booster cables can be removed.
-Can I use the charger as a power supply?
7-Stage chargers are designed to only supply power to the battery clips when
they are connected correctly to a battery. This is to prevent sparks during connection to
the battery or if connected incorrectly by mistake. This safety feature prevents the
charger from being used as a ‘Power Supply’. No Voltage will be present at the clips
until connected to the battery.
One year warranty.
OEM is AVAILABLE!
Excellent Pre-sales and After sales service system.