Stainless steel membrane shell is a basic component of reverse osmosis equipment, the material is 304 stainless steel seamless pipe, according to the end cap seal is divided into: clamp, flange, built-in; according to the water into the way: Enter. Length and reverse osmosis membrane modules supporting the number; product inside and outside polishing, beautiful and practical, the use of pressure to achieve the normal operation of reverse osmosis pressure requirements.
material | stainless steel 304 |
inlet /outlet ort size | 1/2"*3/4" |
work pressure | 250psi |
size | 4"*40" |
accessroies | victaulic clam closure & end port |
max sustained temperature | 50 centigrade |
Usage | fixing 4040 RO membrane |
packing | 1pcs/carton |
end cap material | ABS ,stainless steel |
♦Pressure: 2.0 ~ 2.5MPa
♦Water way: both ends of the water, water on both sides
♦Structure: Standard parts, disassembly convenient and quick
♦Sealing: the pressure test
♦Both ends of the organizational structure: clamp type, card type, within the spring-type.
4040 Membrane sub-seams and seamless two, made of SUS304 stainless steel. Both ends with ABS head plus silicone O-ring seal, sealing performance, long service life.
8040 Membrane shell: Two kinds of split sleeve and end cap, made of SUS304 seamless stainless steel tube, good sealing performance, high pressure resistance, no aging, easy installation and cleaning, working pressure (Mpa): 4.0. Membrane shell inlet and outlet according to customer requirements, the end (out) or side (out). Stainless steel membrane shell 2.5 inches, 4 inches, 8 inches and so on.
1.4-inch RO membrane shell has a core loaded , 2-core installed ,3-core equipment, 4-core equipment and other series.
2. Membrane shell tube is divided into two seamless pipe.
3. The inlet and outlet connections have side to side out, end into the end of two; specifications are 6 points x4 points and 4 points x4 points two.
4. Head material ABS, stainless steel.