RJ | 1 | 2 | 08 | E | E | |||||
Brand | Series | Voltage | Power | Encoder | Communication | |||||
RJ:RIJING | 1:G2 Series 2:G Series 3:K Series 4:iK3 Series 5:K1 Series | 2:220VAC Single/ Three Phase 3:380VAC Three Phase | 04: 0.4KW 08: 0.75KW 20: 2KW 35: 3.5KW 50: 5KW | A:Absolute E:Incremental X:Resolver C:Magnetic | No Mark:RS485 E:Ethercat C:CAN bus | |||||
Please consult customer service for more power |
AC 220V power level(kW) | 0.4 0.75 1.5 2.2 3 5 | ||||
Output current(A) | 2.8 5.5 10 12 16 25 | ||||
AC 380V power level(kW) | 5 7.5 | ||||
Output current(A) | 12 20 | ||||
Encoder type | 2500 line incremental encoder 17 bits absolute encoder | ||||
Regenerative resistor | Built-in or external | ||||
Control mode | IGBT pulse width modulation control sine wave current drive mode | ||||
performance | Speed control range | 1:10000(The lower limit of the speed control range is smooth running at rated load without creeping) | |||
Speed volatility | Load fluctuation | 0~100% load: max. ±0.01% (Rated speed) | |||
Voltage fluctuation | Rated voltage: ±10%:0%(Rated speed) | ||||
Temperature fluctuation | 25±25˚C: Max±0.1%(Rated speed) | ||||
Torque control accuracy (reproducibility) | 1% | ||||
Soft start time setting | 0 ~10 seconds (acceleration and deceleration can be set separately) | ||||
Communication function | RS-485 Communication | Protocol | MODBUS | ||
1:N communication | Up to N = 127 stations | ||||
Axis address setting | By parameter setting | ||||
CAN Communication | Protocol | CANOpen ( DS301+DS402 ) | |||
1:N communication | Up to N = 127 stations | ||||
Axis address setting | By parameter setting |