FRP raw materials fiberglass chopped strands for PP resin electronics parts
FRP raw materials fiberglass chopped strands for PP resin electronics parts is fiberglass strands chopped into specified length. It's mainly applied in reinforcing thermoplastics like BMC, SMC. Typical products include automotive fittings, electrical parts, FRP skylight board, fiberglass fish tank etc. Also fiberglass chopped strands is widely used as raw material of construction field, such as concrete, plasterboard, waterproofing material, base material of plastic floor, heat insulation material, FRP surfacing tissue, decorative wall panels etc. By using fiberglass chopped strands, the products' performance improve apparently in mechanical strength and anti-corrosion capatity. When used in concrete, the weight of building gets down, so the using life get longer.
Product Feature
1.Excellent dispersion
2.Excellent resin compatibility
3.Good composite mechanical properties
4.Good chemical resistance
5.Low fuzz level
6.Minimum production downtime
7.Constant quality of products
8.High strength of finished products
Tech data
Specs | Glass type | Diameter(μm) | Chopped Length(mm) | MOI(%) | Compatible Resin |
Y4010 | E | 10-16 | 3/4.5/6/12/25 | ≤ 0.2 | PA |
Y4012 | E | 10-16 | 3/4.5/6/12/25 | ≤ 0.2 | PP |
Fiberglass chopped strands
Fiberglass chopped strands is packed into bag, about 25 Kg per bag. 32 bags a pallet. All the bags are fixed by shink film and packing straps. A 20' FCL can hold about 20 tons of fiberglass chopped strands.
We can also provide fiberglass chopped strand mat, woven roving, fiberglass roving and yarn. If you should have any interest, please do not hesitate to contact us.