Characteristics:
Longer coating interval Excellent water and salt water resistance Tough and firm film with abrasion resistance High-build heavy-duty coatings, Good compatibility with a variety of subsequent coats |
Uses:
Applied to the iron and steel surfaces sprayed with zinc dust, which provides excellent adhesion to |
Technical target :
Technical Parameter |
Drying Time & Coating Intervals |
Mixing ratio: main agent/firming agent=8:1 Academic spreading rate: Dry : 50μm/ layerWet:85 μm/ layer Solid contents: 77% Humidity requirement: below 85% Coverage rate:0.13kg/m2/50μm 0.09L/m2/50μm Specific gravity: 1.6 |
Temperature ℃ 10 25 35 Dry to touch min 20 8 5 Dry to handle hrs 6 4 2 Min interval hrs 24 12 7 Max interval d |
Substrate treatment:
Remove salts and other contaminants by high pressure fresh water cleaning Remove oil thoroughly with suitable detergent in accordance with SSPC-SP1 All damage of shop primer, rust and oxide layer should be thoroughly cleaned by abrasive blasting to Sa 2½ Dust and other contaminant clean by vacuum Confirm the surface clean and dry |
Coating system:
Steel: bare steel Preceding coat: zinc primer, epoxy primer, or refer to our coating system Top coat: many primers or refer to our system |
1. OEM service.
2. Technical support if your order is large enough.
3. Exchange and refund service if our products have quality problems.
4. Assured quality, reasonable price and perfect after-sales service.
5. 24 hours on line for your reference.
1. Can you provide some free samples?
Yes, free sample is available.
2. How do you make sure the high quality?
We have strict product quality control testing.We also have got the ISO9001
quality management system certificate and BV certificate.
3. Who is your main customer?
We export to more than 50 countries, such as Oceania, MiddleEast, North
America, South America, Eastern Europe, etc.