Find More Reflective Materials fr V-CAN
V-MARK™ Photoluminescent Material Class C # PLFF-25030-ACR Photoluminescent Vinyl is designed to produce safety and emergency exit signage, making photoluminescent egress path marking system for buildings required by IBC/IFC 2009. It could be used on residential house as well, marking on the steps, handrails, stair landings, egress path obstacles and exit doors of enclosed stairwells.
Product Data
Physical Properties |
Property Description |
Visual Appearance |
Glossy appearance, light yellow green color |
Adhesive |
Permanent pressure sensitive |
Application Surface |
Flat, simple curves |
Application |
50°F to 100°F |
Temperature Range |
10°C to 38°C |
Meet and exceeds
Application and Uses
Technical Data (mcd/m2)
(excitation source is 1000 LX, test begin at saturating amount of excitation energy)
Emission peak |
10 minutes |
60 minutes |
90 minutes |
≥1000 |
≥250 |
≥30 |
≥15 |
Cutting
The accepted cutting methods for V-MARKTM Photoluminescent Vinyl Tape are bandsaw, guillotine,hand cut, die cut, and flatbed electronic cutter.
Printing
Available for graphic printing and plotter cutting.
Chemical Characteristics
Resists mild acids, mild alkalis, and salt spray.
Performance Life
The performance life of photoluminescent material may vary depending on application techniques. Experience has shown that when properly applied, this material will remain highly effective for safety and emergency exit signage for up to 10 years but no warranty of durability is given for this material.