general purpose non-shrink cementitous grout for Setting turbine base plates
BiaoYuan Cement based grouting products are suitable for different fixing and bedding applications as machinery bases, bearing plates, steel frames, etc
BiaoYuan Non shrink Grout using for Concrete - poured in place, precast, tilt-up and prestressed
Heavy Machinery;Dowel Rods;Sole Plates;Reinforcing Steel in Block Cells;Anchor Bolts;Concrete Columns;Steel Bearing Plates
A):Has a good flow, rapid hardening, early strength, high-strength, nonshrink, expansive; nonpoisonous, harmless, aging, water quality and environment pollution-free, since tightness good, rust and so on.
B):Early strength and high strength and high strength 20-50Mpa more than 1-3 days after pouring, to shorten the duration.
C):Micro expansion in long-term use gating Non shrinking to ensure that devices and the foundations of the close contacts between the Foundation and the basis for non-shrinking and the expansion of the appropriate pressure to ensure long-term security devices strain relief operation.
D):Gravity State just add water and stir, directly into equipment, mortar self-flow to ensure vibration-free, long Grouting.
Item |
Technical date |
||||||
Category |
CGM-BY45 |
CGM-BY50 |
CGM-BY60 |
CGM-BY70 |
CGM-BY90 |
CGM-340 |
|
/ |
Standard type |
High strength |
Early strength type |
Ultra early strong |
Ultra-flow |
||
Compressive strength |
1d |
≥20 |
≥22 |
≥25 |
≥30 |
≥40 |
≥25 |
3d |
≥40 |
≥40 |
≥45 |
≥50 |
≥55 |
≥45 |
|
28d |
≥60 |
≥70 |
≥80 |
≥75 |
≥70 |
≥80 |
|
Fluidity(min) |
Initial Value |
≥280 |
≥290 |
≥340 |
|||
30Min retention value |
≥260 |
≥310 |
|||||
Vertical expansion rate% |
3h |
0.1-3.5 |
|||||
|
Difference between 3h and 24H expansion |
0.02-0.5 |
|||||
No corrosive effect on reinforcement |
No |
||||||
Bleeding rate% |
0 |